TECHNICAL DATA
Recommended original and replacement bar and chain combinations
Following is a list of recommended cutting equipment for Husqvarna chain saw models 570, 576 XP and 576 XPG.These chain saw models equipped with either of the listed bar and sawchain combinations, fulfills the requirements according to ANSI B
| Bar |
|
| Chain |
|
|
|
|
|
|
|
Length, inch | Pitch, inch | Gauge, inch | Max. nose radius | Type | Drive link count |
|
|
|
|
|
|
16 | 3/8 | 0,058 |
|
| 60 |
|
|
|
|
|
|
18 | 3/8 | 0,058 |
| Husqvarna H42, | 68 |
|
|
|
|
| |
20 | 3/8 | 0,058 |
| 72 | |
| Husqvarna H48 | ||||
|
|
|
|
| |
24 | 3/8 | 0,058 |
|
| 84 |
|
|
|
|
|
|
28 | 3/8 | 0,058 |
|
| 92 |
|
|
|
|
|
|
16 | 3/8 | 0,050 | 11T |
| 60 |
|
|
|
|
|
|
18 | 3/8 | 0,050 |
| Husqvarna H46, | 68 |
|
|
|
|
| |
20 | 3/8 | 0,050 |
| 72 | |
| Husqvarna H47, | ||||
24 | 3/8 | 0,050 |
| Husqvarna H47S, | 84 |
|
|
|
| Husqvarna H82 |
|
28 | 3/8 | 0,050 |
| 93 | |
|
| ||||
|
|
|
|
|
|
32 | 3/8 | 0,050 |
|
| 105 |
|
|
|
|
|
|
Note: ATM (Armour Tip Medium) is a designation for a hard nose bar with nose radius 1,33”.
WARNING! This chain saw model is capable of severe kickback that could result in serious injuries
! to the user. Do not operate this saw unless you have extraordinary cutting needs and experience and specialized training for dealing with kickback. Saws with significantly reduced kickback potential are available. Always use the safest saw and cutting equipment applicable to your cutting need.
Saw chain filing and file gauges
40 – English
