Technical Data, Technical data | Husqvarna 576XP AutoTune specification

TECHNICAL DATA
Technical data
	576XP AutoTune
Engine
Cylinder displacement, cu.in/cm3	4,5/73,5
Cylinder bore, inch/mm	2,0/51
Stroke, inch/mm	1,42/36
Idle speed, rpm	2700
Power, kW/hp @ rpm	4,2/5,7 @ 9600
Ignition system
Manufacturer of ignition system	SEM
Type of ignition system	CD
Spark plug	NGK BPMR 7A/ Champion RCJ 7Y
Electrode gap, inch/mm	0,02/0,5
Fuel and lubrication system
Manufacturer of carburetor	Zama
Carburetor type	C1M-EL40
Fuel tank capacity, US pint/litre	1,48/0,7
Oil pump capacity at 9,000 rpm, ml/min	5-22
Oil tank capacity, US pint/litre	0,80/0,40
Type of oil pump	Automatic
Weight
Chain saw without bar or chain, empty tanks, lb/kg	14,9/6,8
	XPG: 14,9/6,8
Chain/bar
Recommended bar lengths, inch/cm	16-32”/40-80
Pitch, inch/mm	3/8" /9,52
Thickness of drive links, inch/mm	0,050/1,3
	0,058/1,5
Usable cutting length, inches/cm	15-31”/38-78
Drive sprocket type/teeth	Rim/7
Chain speed at max. power, m/sec	21,4

English – 37

Page 37

Image 37

Husqvarna 576XP AutoTune manual Technical Data, Technical data

Contents

576XP AutoTune Symbols on the machine KEY to SymbolsSymbols in the operator’s manual You will ﬁnd the following labels on your chain saw Contents Dear customer Introduction What is what on the chain saw? What is WHAT? Before using a new chain saw General Safety Precautions Always use common sense Machine′s safety equipmentPersonal protective equipment Chain brake and front hand guard General Safety Precautions Chain catcher Throttle lockoutRight hand guard Cutting equipment Stop switchVibration damping system Mufﬂer Bar Cutting equipment designed to reduce kickbackChain General information on sharpening cutting teeth Sharpening your chain and adjusting depth gauge setting Tensioning the chain Filling with chain oil Lubricating cutting equipmentChecking chain lubrication Needle bearing lubrication Chain drive sprocketChecking wear on cutting equipment Fitting the bar and chain AssemblyWorking with the chain Fuel Fuel Handling Fueling Fuel safetyTransport and storage Long-term storage Starting and stopping Starting and StoppingCold engine Warm engine Stopping Working Techniques Basic safety rulesBefore use General working instructions General rules Terms Basic cutting technique Limbing Safe distance Tree felling techniqueFelling direction Clearing the trunk and preparing your retreat Felling cut Directional cuts Freeing a tree that has fallen badly General adviceFreeing a trapped tree Cutting trees and branches that are in tension What is kickback? How to avoid kickbackCutting the trunk into logs Carburetor adjustment MaintenanceGeneral Immediately Checking the inertia brake release Mufﬂer Changing a broken or worn starter cord StarterTensioning the recoil spring Changing a broken recoil spring Spark plug Air ﬁlterLubricating the bar tip sprocket Fitting the starter Air Injection centrifugal cleaning Adjustment of the oil pumpWhen making adjustments Needle bearing lubrication Temperature -5C 23F or colder Temperature 0C 32F or colderWinter use Fitting the winterising kit Daily maintenance Weekly maintenance Monthly maintenance Maintenance schedule Technical data Technical Data With signiﬁcantly reduced kickback potential are available Saw chain ﬁling and ﬁle gauges Your Warranty Rights and Obligations Federal Emission Control Warranty Statement Safety precautions for chain saw users American Standard Safety PrecautionsKickback safety precautions Other safety precautionsPage ´z+S==¶5\¨ Page 1151292-95

TECHNICAL DATA

Technical data

Engine

Ignition system

SEM

Fuel and lubrication system

Chain/bar