CUSTOMER RESPONSIBILITIES

LAWN MOWER

Always observe safety rules when performing any mainte- nance.

TIRES

•Keep tires free of gasoline, oil, or insect control chemi- cals which can harm rubber.

•Avoid stumps, stones, deep ruts, sharp objects and other hazards that may cause tire damage.

BLADE CARE

For best results, mower blade must be kept sharp. Replace bent or damaged blades.

TO REMOVE BLADE (See Fig. 9)

1.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with spark plug.

2.Turn lawn mower on its side. Make sure air filter and carburetor are up.

3.Use a wood block between blade and mower housing to prevent blade from turning when removing blade bolt.

NOTE: Protect your hands with gloves and/or wrap blade with heavy cloth.

4.Remove blade bolt by turning counter-clockwise.

5.Remove blade and attaching hardware (bolt, lock washer and hardened washer).

NOTE: Remove the blade adapter and check the key inside hub of blade adapter. The key must be in good condition to work properly. Replace adapter if damaged.

TO REPLACE BLADE (See Fig. 9)

1.Position the blade adapter on the engine crankshaft. Be sure key in adapter and crankshaft keyway are aligned.

2.Position blade on the blade adapter aligning the two (2) holes in the blade with the raised lugs on the adapter.

3.Be sure the trailing edge of blade (opposite sharp edge) is up toward the engine.

4.Install the blade bolt with the lock washer and hardened washer into blade adapter and crankshaft.

5.Use block of wood between blade and lawn mower housing and tighten the blade bolt, turning clockwise.

•The recommended tightening torque is 35-40 ft. lbs.

IMPORTANT: Blade bolt is grade 8 heat treated.

TO SHARPEN BLADE

NOTE: We do not recommend sharpening blade - but if you do, be sure the blade is balanced.

Care should be taken to keep the blade balanced. An unbalanced blade will cause eventual damage to lawn mower or engine.

•The blade can be sharpened with a file or on a grinding wheel. Do not attempt to sharpen while on the mower.

•To check blade balance, drive a nail into a beam or wall. Leave about one inch of the straight nail exposed. Place center hole of blade over the head of the nail. If blade is balanced, it should remain in a horizontal position. If either end of the blade moves downward, sharpen the heavy end until the blade is balanced.

BLADE

 

CRANKSHAFT

 

KEYWAY

ADAPTER

 

 

KEY

 

 

BLADE

 

 

BLADE

 

 

BOLT

 

CRANKSHAFT

HARDENED

 

 

 

WASHER

TRAILING

 

LOCK

 

EDGE

BLADE ADAPTER

WASHER

 

 

 

FIG. 9

GRASS CATCHER

•The grass catcher may be hosed with water, but must be dry when used.

•Check your grass catcher often for damage or deterio- ration. Through normal use it will wear. If catcher needs replacing, replace only with a manufacturer approved replacement catcher. Give the lawn mower model number when ordering.

11

Page 10 Page 12
Page 11
Image 11
Husqvarna 6022CH owner manual Lawn Mower, Tires, Blade Care, Grass Catcher
Page 10 Page 12

6022CH specifications

The Husqvarna 6022CH is a robust and highly efficient chainsaw designed for both professional and private users who demand power and performance. This versatile tool is perfect for tasks ranging from felling trees to pruning branches, making it an essential addition for anyone in need of reliable cutting capabilities.

One of the standout features of the Husqvarna 6022CH is its lightweight design, which allows for prolonged use without excessive fatigue. The chainsaw weighs in at approximately 4.4 kg, making it easy to maneuver and control, even during extended projects. The ergonomic handle is designed for optimal grip and comfort, providing a secure hold that enhances precision while reducing vibrations for a more enjoyable cutting experience.

Powering the Husqvarna 6022CH is a high-performance 2.0 kW engine. This engine utilizes advanced technology to deliver reliable starting and consistent power output, ensuring that users can tackle various tasks with confidence. The advanced air injection system helps keep the air filter cleaner for longer periods, resulting in less maintenance and an extended lifespan for the chainsaw.

Another critical characteristic of the Husqvarna 6022CH is its efficient chain brake system, providing an added layer of safety for users. This feature helps prevent accidents by quickly halting the chain in the event of kickback, promoting a safer working environment. The tool-less chain tensioning feature allows for quick adjustments, enabling users to easily maintain optimal performance while minimizing downtime.

Moreover, the chainsaw boasts a low vibration technology that significantly reduces the level of vibrations transmitted to the hands and arms of the operator. This feature not only enhances user comfort but also decreases the risk of long-term injuries associated with prolonged use of power tools.

To cater to specific cutting needs, the Husqvarna 6022CH can be fitted with different guide bar lengths. This adaptability is ideal for varying tasks, allowing users to choose the best setup depending on the job. The chainsaw's design also incorporates a quality chain that facilitates smooth and fast cuts, ensuring efficiency and effectiveness with every use.

In summary, the Husqvarna 6022CH is a high-performing chainsaw characterized by its lightweight design, powerful engine, advanced safety features, and low vibration technology. Its adaptability and ease of maintenance make it a top choice for both professionals and homeowners seeking reliability and efficiency in their cutting tasks. Whether for regular yard work or more demanding projects, the Husqvarna 6022CH is designed to meet the needs of a diverse range of users.
Top Page Image Contents