Husqvarna 61, 268, 272XP manual Weekly maintenance Daily maintenance, Monthly maintenance

MAINTENANCE

Below you will find some general maintenance instructions. If you have more questions, contact your servicing dealer.

Weekly maintenance

Daily maintenance

1.	Check that the AV
	elements are not soft or
	torn.
2.	Lubricate the clutch drum

1

1. Check that all the

components of the throttle

control operate safely (i.e.

throttle lock, throttle lever

and start throttle lock).

2. Clean the chain brake

and check its function

according to the

instructions. Make sure

that the chain catcher is

undamaged. Otherwise

replace it immediately.

3. Clean or replace the air

filter as necessary. Check

for damage or holes.

4. The bar should be turned

daily for more even wear.

Check the lubrication hole

in the bar, to be sure it is

not clogged. Clean the

bar groove, if the bar has

a sprocket tip, this should

be lubricated.

5. Check the function of the

oiler to be sure the bar

and chain receive proper

lubrication.

6. Sharpen the chain and

check its tension and

condition. Check the drive

sprocket for wear.

1

2

3

4

5

6

	bearing.
3.	File off burrs, if any, on
	the sides of the bar.
4.	Clean the spark plug and
	check the gap.
	The correct gap is 0,5 mm
	(0.020 inch).
5.	Check the starter and the
	recoil spring. Clean the
	fins on the flywheel.
6.	Clean the cooling fins on
	the cylinder.
7.	Clean or change the
	screen in the muffler.
8.	Clean the carburettor
	body and air box.

2
3
4	0,5 mm
5
6
7
8

Replace if necessary.

Monthly maintenance

7.	Check the starter and
	starter cord for wear or
	damage. Clean the air
	intake slots on the starter
	housing.
8.	Check for any loose nuts
	and screws and retighten
	if necessary.
9.	Test the stop switch to be
	sure it shuts off the
	engine.

7

8

9

1.Check the brake band on the chain brake for wear.

2.Check the clutch centre, clutch drum and clutch spring for wear.

3.Clean the outside of the carburettor.

4.Check the fuel filter. Change if necessary.

5.Flush the inside off the fuel tank with gasoline.

6.Flush the inside of the oil tank with gasoline.

7.Check all cables and connections.

1

2

3

4

5

6

7

English – 33