Husqvarna 61, 268, 272XP manual

TECHNICAL DATA

	272XP
Engine
Cylinder volume, cu.in/cm3	4,4/72,2
Cylinder bore, inch/mm	2,05/52
Stroke, inch/mm	1,3/34
Idle speed, rpm	2.500
Recommended max.
speed, unloaded, rpm	13.500
Power, kW/ rpm	3,6/9.300
Ignition system
Manufacture	Electrolux
Type of ignition system	ET
Spark plug	Champion
Electrode gap, inch/mm	RCJ 7Y
	0.020/0,5
Fuel and lubrication
system
Manufacturer	Tillotson
Carburettor type	HS 260
Fuel capacity, US pint/litre	1.6/0,75
Oil pump capacity at 8500 rpm,
ml/min	3-6-9-12
Oil capacity, US pint/litre	0,95/0,45
Type of oil pump	Automatic
Weight
Without bar and chain, Lbs/kg	13,9/6,3
	XPG: 14,3/6,5

Bar and chain combinations

The following combinations are CE approved.

	Bar		Chain
Length,	Pitch,	Max.
inches	inches	tip radius
15	3/8	11T	Husqvarna H42
16	3/8	11T	Husqvarna H42
18	3/8	11T	Husqvarna H42
20	3/8	11T	Husqvarna H42

272XP

Noise levels

Equivalent (see note 1) noise
pressure level at operator’s
ear, measured according to
relevant international	101
standards, dB(A).
Equivalent (see note) noise
power level, measured
according to relevant interna-	110
tional standards, dB(A).

Vibration levels

(See note 2)	3,2
Front handle m/s2
Rear handle m/s2	3,9

Chain/bar

Standard bar length,
inches/cm	15"/38
Recommended bar lengths,
inches/cm	15"/38–20"/51
Usable cutting length,
inches/cm	14"/36–19"/48
Chain speed at max.
power, m/sec	20,7
Pitch, inches	3/8"
Thickness of drive link, inch/mm	0.058"/1,5
Number of teeth on drive
sprocket	7

Note 1: Equivalent noise level is, according to ISO 7182 and ISO 9207, calculated as the time-weighted energy total for noise levels under various working conditions with the following time distribution: 1/3 idle, 1/3 max. load, 1/3 max. speed.

Note 2: Equivalent vibration level is, according to ISO 7505, calculated as the time-weighted energy total for vibration levels under various working conditions with the following time distribution: 1/3 idle, 1/3 max. load, 1/3 max. speed.

L

1

5

Type	Inch	Inch/mm	Inch/mm	Angle	Angle	Angle	Inch/mm	Inch/cm: dl
H42	3/8"	0.058"/1,5	7/32" /5,5	60°	25°	10°	0.025"/0,65	15"/38:56	16"/41:60
								18"/46:68	20"/51:72

English – 35