Husqvarna 650RTT TINE REPLACEMENT See Figs. 24, 25, and, Service And Adjustments, tine13

SERVICE AND ADJUSTMENTS

TINE REPLACEMENT (See Figs. 24, 25, and 26)

CAUTION: Tines are sharp. Wear gloves or other protection when han- dling tines.

A badly worn tine causes your tiller to work harder and dig more shallow. Most important, worn tines cannot chop and shred organic matter as effectively nor bury it as deeply as good tines. A tine this worn needs to be replaced.

•To maintain the superb tilling performance of this machine the tines should be checked for sharpness, wear, and bending, particularly the tines which are next to the transmission. If the gap between the tines exceeds 3-1/2 inches (9 cm), they should be replaced or straightened as necessary.

•New tines should be assembled as shown in Fig. 26. Sharpened tine edges will rotate rearward from above.

tine_3

NEW TINE WORN TINE

FIG. 24

TINE TINE

3-1/2" MAX (9 CM)

FIG. 25

SHARP EDGE	HAIRPIN CLIP
COUNTER
TINE
ROTATION
		HAIRPIN CLIP
	SHARP EDGES	SHARP EDGE
SHEAR PIN	SHARP
SHARP
EDGE	EDGES
	SHEAR PIN
	tine_13

FIG. 26

16