STORAGE

Immediately prepare your lawn mower for storage at the end of the season or if the unit will not be used for 30 days or more.

LAWN MOWER

When lawn mower is to be stored for a period of time, clean it thoroughly, remove all dirt, grease, leaves, etc. Store in a clean, dry area.

1.Clean entire lawn mower (See “CLEANING” in the Maintenance section of this manual).

2.Lubricate as shown in the Maintenance section of this manual.

3.Be sure that all nuts, bolts, screws, and pins are securely fastened. Inspect moving parts for damage, breakage and wear. Replace if necessary.

4.Touch up all rusted or chipped paint surfaces; sand lightly before painting.

HANDLE (See Figs. 17 and 18)

You can fold your lawn mower handle for storage.

1.Squeeze the bottom ends of the lower handle toward each other until the lower handle clears the handle bracket, then move handle forward.

2.Loosen upper handle mounting bolts enough to allow upper handle to be folded back.

IMPORTANT: WHEN FOLDING THE HANDLE FOR STORAGE OR TRANSPORTATION, BE SURE TO FOLD THE HANDLE AS SHOWN OR YOU MAY DAMAGE THE CONTROL CABLES.

Whensettingupyourhandlefromthestorageposition,the lower handle will automatically lock into mowing position.

SQUEEZE

TO ADJUST

LOWER HANDLE

FIG. 17

OPERATOR

MOWING

POSITION

PRESENCE

CONTROL

 

BAR

 

FOLD

FORWARD

FOR

STORAGE

UPPER

HANDLE

HANDLE

KNOB

ENGINE

FUEL SYSTEM

IMPORTANT: IT IS IMPORTANT TO PREVENT GUM DEPOSITS FROM FORMING IN ESSENTIAL FUEL SYSTEM PARTS SUCH AS CARBURETOR, FUEL FILTER, FUEL HOSE, OR TANK DURING STORAGE. ALCOHOL BLENDED FUELS (CALLED GASOHOL OR USING ETHANOL OR METHANOL) CAN ATTRACT MOISTURE WHICH LEADS TO SEPARATION AND FORMATION OF ACIDS DURING STORAGE. ACIDIC GAS CAN DAMAGE THE FUEL SYSTEM OF AN ENGINE WHILE IN STORAGE.

Empty the fuel tank by starting the engine and letting it run until the fuel lines and carburetor are empty.

Never use engine or carburetor cleaner products in the fuel tank or permanent damage may occur.

Use fresh fuel next season.

NOTE: Fuel stabilizer is an acceptable alternative in mini- mizing the formation of fuel gum deposits during storage. Add stabilizer to gasoline in fuel tank or storage container. Always follow the mix ratio found on stabilizer container. Run engine at least 10 minutes after adding stabilizer to allow the stabilizer to reach the carburetor. Do not empty the gas tank and carburetor if using fuel stabilizer.

ENGINE OIL

Drain oil (with engine warm) and replace with clean en- gine oil. (See “ENGINE” in the Maintenance section of this manual).

CYLINDER

1.Remove spark plug.

2.Pour one ounce (29 ml) of oil through spark plug hole into cylinder.

3.Pull starter handle slowly a few times to distribute oil.

4.Replace with new spark plug.

OTHER

Do not store gasoline from one season to another.

Replace your gasoline can if your can starts to rust. Rust and/or dirt in your gasoline will cause problems.

If possible, store your unit indoors and cover it to give protection from dust and dirt.

Cover your unit with a suitable protective cover that does not retain moisture. Do not use plastic. Plastic cannot breathe, which allows condensation to form and will cause your unit to rust.

IMPORTANT: NEVER COVER MOWER WHILE ENGINE AND EXHAUST AREAS ARE STILL WARM.

CAUTION: Never store the lawn mower with gasoline in the tank inside a build- ing where fumes may reach an open flame or spark. Allow the engine to cool before storing in any enclosure.

LOWER HANDLE

FIG. 18

13

Page 13
Image 13
Husqvarna 7021P owner manual Storage, Other, Fuel System, Engine OIL, Cylinder

7021P specifications

The Husqvarna 7021P is a powerful and efficient gas-powered lawn mower that stands out for its robust performance and user-friendly features. Designed for residential use, this mower combines power, precision, and convenience to help homeowners achieve the perfect lawn.

At the heart of the Husqvarna 7021P is a reliable 160cc gas engine, which delivers ample power for cutting through thick grass and tackling uneven terrain. This engine is designed to start easily and provide consistent performance, ensuring that the mower operates smoothly during each mowing session. The 7021P features a 21-inch cutting deck, making it ideal for medium-sized yards, allowing users to cover more ground with fewer passes.

One of the standout features of the Husqvarna 7021P is its 3-in-1 cutting system. This versatile system gives users the option to mulch, rear bag, or side discharge the clippings, offering flexibility based on personal preference and lawn care needs. Mulching is particularly beneficial as it recycles the grass clippings back into the soil, promoting healthy grass growth and reducing waste.

The mower is equipped with a dual-lever height adjustment system, allowing users to easily set the cutting height to their desired level. This feature provides a range of cutting heights, accommodating different grass types and conditions.

Additionally, the Husqvarna 7021P features durable wheels that provide excellent traction and maneuverability. The front wheels are 8 inches, while the rear wheels are 11 inches, allowing for smooth navigation over various terrains. The mower also includes an ergonomically designed handle, which not only enhances user comfort but also folds down for easy storage.

A thoughtful design characteristic of the 7021P is its easy-access fuel tank, which simplifies refueling during use. Moreover, the mower's lightweight construction makes it easy to maneuver and transport, ensuring that mowing is not only efficient but also an enjoyable experience.

In summary, the Husqvarna 7021P is a well-rounded lawn mower that showcases a blend of power, versatility, and convenience. Equipped with a reliable engine, a 3-in-1 cutting system, height adjustment capabilities, and ergonomic features, it is designed to meet the needs of homeowners who seek a reliable tool for maintaining a beautiful lawn. Whether tackling small patches or larger areas, the Husqvarna 7021P is built to deliver excellent results.