Service and Adjustments, Chute Deflector

SERVICE AND ADJUSTMENTS

WARNING: To avoid serious injury, before performing any service or ad- justments:

1.Be sure throttle is in STOP position.

2.Remove safety ignition key.

3.Make sure the augers and all moving parts have completely stopped.

4.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

SNOW THROWER

TO ADJUST SNOW THROWER HEIGHT

See “TO ADJUST SKID PLATES” and “SCRAPER BAR” in the Operation section of this manual.

CHUTE DEFLECTOR

The chute deﬂ ector, attached to the top of the discharge chute, is provided to direct discharging snow away from the operator. If the deﬂ ector becomes damaged, it should be replaced.

WARNING: To avoid serious injury, never operate your snow thrower with the deﬂector removed or damaged.

•To change direction and/or distance snow is discharged, see “TO CONTROL SNOW DISCHARGE” in the Op- eration section of this manual.

SHEAR BOLTS (See Fig. 22)

AUGER SHEAR BOLTS

Both right and left-hand augers are secured to the auger shaft with a shoulder/shear bolt and hex nut. Should a for- eign object or ice become lodged in the augers, the shear bolts are designed to break, preventing damage to any other components. If one or both augers do not turn when auger control lever is engaged, check to see if one or both of the bolts have sheared. To replace the shear bolts:

1.Disengage all controls and move throttle control to STOP position. Wait for all moving parts to stop.

2.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

3.Align hole in auger hub with hole in auger shaft and install a new 1/4-20 x 2" shoulder/shear bolt. Install 1/4-20 lock nut and tighten securely.

CAUTION: Do not substitute. Use only original equipment shear bolts as supplied with your snow thrower.

4.Connect spark plug wire to spark plug.

IMPELLER SHEAR BOLTS
The impeller is secured to the impeller shaft with two (2)
capscrew/shear bolts and hex nuts. Should a foreign object
or ice become lodged in the impeller, the capscrews are
designed to break, preventing damage to any other com-
ponents. If impeller does not turn when auger control lever
is engaged, check to see if the capscrews have sheared.
To replace the capscrew/shear bolts:	16

1.Disengage all controls and move throttle control to STOP position. Wait for all moving parts to stop.

2.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

3.Align holes in impeller hub with holes in impeller shaft and install two (2) new 1/4-20 x 1-5/8" capscrew/shear bolts. Install 1/4-20 locknuts and tighten securely.

CAUTION: Do not substitute. Use only original equipment capscrew/shear bolts as supplied with your snow thrower.

4.Connect spark plug wire to spark plug.

1/4-20	1/4-20 x 1-5/8	1/4-20 x 2
LOCKNUT	CAPSCREW /	SHOULDER /
	SHEAR BOLT	SHEAR BOLT
	IMPELLER HUB
	IMPELLER
	SHAFT
		AUGER
		HUB
1/4-20
LOCKNUT	AUGER HUB	AUGER SHAFT

FIG. 22

TO REMOVE BELT COVER (See Fig. 23)

1.Remove the two (2) screws securing belt cover to frame.

2.Remove belt cover.

•Replace belt cover by installing cover and screws and tighten securely.

	BELT
	COVER
FRAME	SCREWS

FIG. 23

9027STE specifications

The Husqvarna 9027STE is a powerful and versatile lawn mower designed specifically for tackling challenging terrains and delivering a superior cutting experience. Built with robust features and advanced technologies, this machine stands out in the competitive market of outdoor power equipment.

One of the key attributes of the 9027STE is its efficient cutting system. It boasts a wide cutting deck that allows for faster mowing, reducing the time spent on lawn care. The cutting height is conveniently adjustable, enabling users to customize the grass length to their preference. With its durable blades, the mower provides a clean, sharp cut, promoting healthy grass growth and an aesthetically pleasing lawn.

Powered by a reliable engine, the Husqvarna 9027STE offers exceptional performance and longevity. Its efficient engine design ensures low fuel consumption while still delivering ample power for tackling tough grass and uneven terrain. This enhances the mower’s capability to operate over large areas without frequent refueling, making it ideal for large properties or commercial use.

Incorporating advanced technology, the 9027STE features ergonomic controls that improve user comfort and ease of operation. The intuitive control layout allows for effortless maneuvering, reducing operator fatigue during prolonged use. The lawn mower's compact design further enhances its maneuverability, enabling users to navigate around obstacles and tight spaces with ease.

Safety is a priority with the Husqvarna 9027STE, which is equipped with various safety features including an automatic shut-off mechanism that engages when the mower is not in use, preventing accidental starts. This adds an extra layer of protection for the operator, especially when working in proximity to children or pets.

Another standout characteristic of the 9027STE is its durability. Made from high-quality materials, the mower is built to withstand the rigors of regular use and is resistant to wear and tear, ensuring a long lifespan. Moreover, the model is easy to maintain, with readily accessible components making it simple for users to service and keep in optimal condition.

Overall, the Husqvarna 9027STE is a top-tier choice for those seeking a reliable, efficient, and user-friendly lawn mower. Its combination of power, advanced features, and durability makes it an investment worth considering for both residential and commercial lawn care needs. Whether you're a homeowner maintaining a lush garden or a professional landscaper, the 9027STE promises to deliver impressive results and convenience.

Husqvarna 9027STE Service and Adjustments, To Adjust Snow Thrower Height, Chute Deflector

Models: 9027STE