TRACTOR - - MODEL NUMBER LTH18538 (289600)
ENGINE
KEY | PART | |
NO. | NO. | DESCRIPTION |
1 | - - - - - - | Engine Briggs Model No. |
| | 31N707-1374-B1 |
2 | 532 13 73-52 | Muffler |
9 | 532 19 43-20 Keeper Belt Engine |
12 | 532 40 54-71 | Pulley Engine |
15 | 532 40 75-45 | Tank Fuel |
18 | 532 43 02-20 | Cap Fuel |
20532 18 38-97 Control Throttle/Choke
21532 41 63-58 Screw #10 x 0.750 BOS Thread
28 | 532 40 11-37 | Fuel Line |
29 | 532 13 71-80 Spark Arrester Kit |
37 | 532 12 34-87 | Clamp Hose |
42 | 810 04 07-00 Washer Lock 7/16 |
45 | 873 51 04-00 Nut Keps Hex 1/4-20 unc |
69 | 532 16 52-91 | Gasket |
79 | 532 19 23-34 | Screw 5/16-18 x 3/4 |
84817 06 06-20 Screw 3/8-16 x 1/4
85532 17 39-37 Bolt Hex 7/16-20 x 4 Gr. 5
90 | 817 00 06-16 Screw 3/8-16 x 1 |
96819 09 14-16 Washer 9/32 x 7/8 x 16 Ga.
97817 67 04-12 Screw 1/4-20 x 3/4
122 532 42 19-22 Extension Drain Oil
NOTE: All component dimensions given in U.S. inches 1 inch = 25.4 mm
For engine service and replacement parts, call the toll free number for your engine manufacturer listed below:
Briggs & Stratton | 1-800-233-3723 |
Engine Power Rating Information
The gross power rating for individual gas engine models is labeled in accordance with SAE (Society of Automotive En- gineers) code J1940 (Small Engine Power & Torque Rating Procedure), and rating performance has been obtained and corrected in accordance with SAE J1995 (Revision 2002-05). Torque values are derived at 3060 RPM; horsepower values are derived at 3600 RPM. Actual gross engine power will be lower and is affected by, among other things, ambient operat- ing conditions and engine-to-engine variability. Given both the wide array of products on which engines are placed and the variety of environmental issues applicable to operating the equipment, the gas engine will not develop the rated gross power when used in a given piece of power equipment (actual “on-site” or net power). This difference is due to a variety of factors including, but not limited to, accessories (air cleaner, exhaust, charging, cooling, carburetor, fuel pump, etc.), application limitations, ambient operating conditions (temperature, humidity, altitude), and engine-to-engine variability. Due to manufacturing and capacity limitations, Briggs & Stratton may substitute an engine of higher rated power for this Series engine.
