English---9
115299326 Rev.2 7/15/10
ASSEMBLY
SPush the attachment into the coupling until
the attachment snaps into place.
SBefore using the unit, tighten the knob se-
curely.

N

O

TE:Mak e sure unit is assembled cor-
rectly as shown in this manual.

Fitting the loop handle

SClip the loop handle onto the shaft. Note
that the loop handle must be fitted be-
tweenthe arrows on the shaft.
SSlide the spacer into the slot in the loop
handle.
SFit the nut, knob and screw.
SMake a final adjustment of the loop
handle to ac omfortable working position.
Tightenthe k nob( do not overtighten).

Assembling and dismantling

thetwo--pieceshaft

Assembly:

SLoosen the coupling by turning the knob.
SAlign the tab of the attachment (A) with
the arrow on the coupling (B).
B
A

Dismantling:

SLoosen the coupling by turning the knob
(at least three times).
SPushand hold the button(C). While
securely holding the engine end, pull the
attachment straight out of the coupling.
C
ENGINE