SERVICE AND ADJUSTMENTS
WARNING: TO AVOID SERIOUS INJURY, BEFORE PERFORMING ANY SERVICE OR ADJUST- MENTS:
•Depress brake pedal fully and set parking brake.
•Place attachment clutch in “DISENGAGED” position.
•Turn ignition key to “STOP” and remove key.
•Make sure the blades and all moving parts have completely stopped.
•Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.
TO REMOVE MOWER (See Fig. 30) | • Go to other side of mower and disconnect the suspen- | |
• Place attachment clutch in “DISENGAGED” position. | sion arm and rear lift link. | |
• Turn tractor steering wheel to the left as far as it will go. | ||
• Lower attachment lift control to its lowest position. | ||
• Slide mower out from under right side of tractor. | ||
• Disengage belt tension rod (K) from lock bracket (L). | ||
|
CAUTION: Belt tension rod is spring loaded. Have a tight grip on rod and release slowly.
•Remove mower belt from electric clutch pulley (M).
•Disconnect front link (E) from mower - remove retainer spring and washer.
•Go to either side of mower and disconnect mower suspension arm (A) from chassis and rear lift link (C) from rear mower bracket (D) remove retainer springs and washers.
L
K
C
C
D
TO INSTALL MOWER
Follow procedure described in “INSTALL MOWER AND DRIVE BELT” in the Assembly section of this manual.
B M
F
A
E
H
D
Fig. 30
20