Whirlpool MT1135SG Electrical Requirements, Grounding Instructions, Installation Instructions

Models: MT1195SG MT1135SG

1 44
Download 44 pages 12.55 Kb
Page 6
Image 6
INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS

ELECTRICAL REQUIREMENTS

Observe all governing codes and ordinances.

A 120 Volt, 60 Hz, AC only, 15 amp fused electrical supply is required. (A time-delay fuse is recom- mended.) It is recommended that a separate circuit serving only this appliance be provided.

wWARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

GROUNDING INSTRUCTIONS

For all cord connected appliances:

The microwave oven must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. The microwave oven is equipped with a cord having a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded.

WARNING Improper use of the grounding can result in a risk of electric shock.

Consult a qualified electrician or serviceman if the grounding instructions are not completely understood, or if doubt exists as to whether the microwave oven is properly grounded.

Do not use an extension cord. If the power supply cord is too short, have a qualified electrician or serviceman install an outlet near the microwave oven.

For a permanently connected appliance: The microwave oven must be connected to a grounded, metallic, permanent wiring system, or an equipment grounding conductor should be run with the circuit conductors and connected to the equipment grounding terminal or lead on the microwave oven.

6

Page 6
Image 6
Whirlpool MT1135SG, MT1195SG Electrical Requirements, Grounding Instructions, Installation Instructions, wWARNING