First Install ANTI-SWAY BAR S | Husqvarna 96045000503 guide

SERVICE AND ADJUSTMENTS

02965

FIG. 19

A

02965

FIG. 20

NOTE: Be sure mower side suspension arms (A) are pointing forward before sliding mower under tractor.

•Slide mower under tractor until it is centered under tractor.

•FIRST INSTALL ANTI-SWAY BAR (S).

-From right side of mower, insert anti-sway bar into hole in transmission bracket (T).

T	S
T
A
	02995

FIG. 21

-Pivot bar towards you and insert other end of bar into hole in rear mower bracket (D). Move mower as needed to insert bar.

-Secure with washer and retainer spring as shown.

D

FIG. 22

•ATTACH MOWER SIDE SUSPENSION ARMS (A) TO CHASSIS - Position hole in arm over pin (B) on outside of tractor chassis and secure with washer and retainer spring.

•Repeat on opposite side of tractor.

A

B

FIG. 23

•ATTACH REAR LIFT LINKS (C) - Lift rear corner of mower and position slot in link assembly over pin on rear mower bracket (D) and secure with washer and retainer spring.

•Repeat on opposite side of tractor.

C

D

FIG. 24

•Turn steering wheel to position wheels straight for- ward.

19

Image 19

Husqvarna 96045000503 owner manual First Install ANTI-SWAY BAR S

Contents

YTH2348 II. Slope Operation Safety RulesSafe Operation Practices for Ride-On Mowers General Operation IV. Towing ServiceGeneral Service III. Children Table of Contents Unpack Carton AssemblyUnassembled Parts To Remove Tractor from Carton Check Brake System Check Tire PressureCheck Deck Levelness Check for Proper Position of ALL Belts Operation Reverse Operation System ROS on Position Know Your Tractor Stopping HOW to USE Your TractorTo Move Forward and Backward To Operate Mower To Adjust Mower Cutting Height See FigTo Adjust Gauge Wheels See Fig System Characteristics To Transport See Figs Service REMINDER/HOUR MeterUsing the Reverse Operation System Reverse Operation System ROS To Start Engine See Fig Before Starting the EngineCheck Engine OIL Level ADD Gasoline Purge Transmission Mowing Tips Lubrication Chart Maintenance Tires BatteryTractor Brake Operation Transaxle Pump Fluid EngineBelts Transaxle Cooling Cleaning To Install Mower See Figs Service and AdjustmentsTo Remove Mower See Fig First Install ANTI-SWAY BAR S LBF Turn nut right Turn nut left To raise mower To Level Mower To Replace Mower Blade Drive Belt See Fig Mower Drive Belt InstallationMower Drive Belt Removal To Remove Wheel for Repairs See Fig To Replace Motion Drive Belt See FigTo Check Brake Front Wheel TOE-IN/CAMBER To Replace Headlight Bulb To Start Engine with a Weak Battery See FigReplacing Battery See Fig Weak or Dead Fully Charged Battery To Adjust Carburetor To Remove Hood and Grill Assembly See FigTo Adjust Throttle Control Cable To Adjust Choke Control Engine OIL StorageOther Fuel System Problem Cause Correction Troubleshooting Points Engine dies when Tractor Model NO. YTH2348 96045000503, Product no 45 Schematic Electrical KEY Part Description Chassis 196 532 41 45-80 Console Asm. Deck Lift 197 196 Drive Tractor Model NO. YTH2348 96045000503, Product no 45 KEY Part NO. NO. Description Engine Seat Assembly Steering Assembly Wheels and Tires Decals Mower Deck KEY Part NO. NO. Description Mower Lift Limited Warranty Husqvarna S Obligations Under the Warranty