SERVICE AND ADJUSTMENTS

ATTACH FRONT LINK (E) - Work from left side of trac- tor. Insert rod end of link assembly through front hole in tractor front suspension bracket (F) and secure with retainer spring (G) through hole in link located behind the bracket.

EH J

F

G

FIG. 25

Insert other end of link (E) into hole in front mower bracket

(H) and secure with washer and retainer spring (J).

M

FIG. 26

Engage belt tension rod (K) on locking bracket (L).

CAUTION: Belt tension rod is spring loaded. Have a tight grip on rod and engage slowly.

• Disengage belt tension rod (K) from locking bracket

• Raise attachment lift lever to highest position.

• If necessary, adjust gauge wheels before operating

(L).

• Install belt onto engine clutch pulley (M).

mower as shown in the Operation section of this

manual.

IMPORTANT: Check belt for proper routing in all mower

 

pulley grooves.

 

M

LBF

K

A

H E

S

C

D

FIG. 27

20

Page 20
Image 20
Husqvarna 96045000504, 532424761R1 owner manual Lbf