SERVICE AND ADJUSTMENTS
•ATTACH FRONT LINK (E) - Work from left side of trac- tor. Insert rod end of link assembly through front hole in tractor front suspension bracket (F) and secure with retainer spring (G) through hole in link located behind the bracket.
EH J
F
G
FIG. 26
•Insert other end of link (E) into hole in front mower bracket
(H) and secure with washer and retainer spring (J).
M
FIG. 27
•Engage belt tension rod (K) on locking bracket (L).
CAUTION: Belt tension rod is spring loaded. Have a tight grip on rod and engage slowly.
• Disengage belt tension rod (K) from locking bracket | • Raise attachment lift lever to highest position. | |
• If necessary, adjust gauge wheels before operating | ||
(L). | ||
• Install belt onto engine clutch pulley (M). | mower as shown in the Operation section of this | |
manual. | ||
IMPORTANT: Check belt for proper routing in all mower | ||
| ||
pulley grooves. |
|
M
LBF
K
A
H E
S
C
D |
FIG. 28
20
