TROUBLESHOOTING POINTS

 

PROBLEM

CAUSE

CORRECTION

 

Engine continues

1.

Faulty operator-safety presence control

1.

Check wiring, switches and connections. If not

 

to run when oper-

 

system.

 

corrected, contact an authorized service center/

 

ator leaves seat

 

 

 

department.

 

 

 

 

 

 

 

with attachment

 

 

 

 

 

 

clutch engaged

 

 

 

 

 

 

 

 

 

 

 

 

 

Poor cut - uneven

1.

Worn, bent or loose blade.

1.

Replace blade. Tighten blade bolt.

 

 

 

2.

Mower deck not level.

2.

Level mower deck.

 

 

3.

Buildup of grass, leaves, trash under mower.

3.

Clean underside of mower housing.

 

 

4.

Bent blade mandrel.

4.

Replace blade mandrel.

 

 

5.

Clogged mower deck vent holes from

5.

Clean around mandrels to open vent holes.

 

 

 

buildup of grass, leaves, and trash around

 

 

 

 

 

 

mandrels.

 

 

 

 

Mower blades will

1.

Obstruction in clutch mechanism.

1.

Remove obstruction.

 

 

not rotate

2.

Worn/damaged mower drive belt.

2.

Replace mower drive belt.

 

 

3.

Frozen idler pulley.

3.

Replace idler pulley.

 

 

4.

Frozen blade mandrel.

4.

Replace blade mandrel.

 

 

 

 

 

 

 

 

Poor grass

1.

Engine speed too slow.

1.

Place throttle control in “FAST” position.

 

 

discharge

2.

Travel speed too fast.

2.

Shift to slower speed.

 

 

3.

Wet grass.

3.

Allow grass to dry before mowing.

 

 

4.

Mower deck not level.

4.

Level mower deck.

 

 

5.

Low/uneven tire air pressure.

5.

Check tires for proper air pressure.

 

 

6.

Worn, bent or loose blade.

6.

Replace blade. Tighten blade bolt.

 

 

7.

Buildup of grass, leaves, trash under mower.

7.

Clean underside of mower housing.

 

 

8.

Mower drive belt worn.

8.

Replace mower drive belt.

 

 

9.

Blades improperly installed.

9.

Reinstall blades sharp edge down.

 

 

10.

Improper blades used.

10.

Replace with blades listed in parts manual.

 

 

11.

Clogged mower deck vent holes from buildup

11.

Clean around mandrels to open vent holes.

 

 

 

of grass, leaves, trash around mandrels.

 

 

 

 

Headlight(s) not

1.

Switch is “OFF”.

1.

Turn switch “ON”.

 

 

working

2.

Bulb(s) or lamp(s) burned out.

2.

Replace bulb(s) or lamp(s).

 

(if so equipped)

3.

Faulty light switch.

3.

Check/replace light switch.

 

 

4.

Loose or damaged wiring.

4.

Check wiring and connections.

 

 

5.

Blown fuse.

5.

Replace fuse.

 

 

 

 

 

 

 

 

Battery will not

1.

Bad battery cell(s).

1.

Replace battery.

 

 

charge

2.

Poor cable connections.

2.

Check/clean all connections.

 

 

3.

Faulty regulator (if so equipped).

3.

Replace regulator.

 

 

4.

Faulty alternator.

4.

Replace alternator.

 

 

 

 

 

 

 

 

Loss of drive

1.

Freewheel control in “disengaged” position.

1.

Place freewheel control in “engaged” position.

 

 

2.

Debris on steering plate (if equipped).

2.

See "CLEANING" in the maintenance section.

 

 

3.

Motion drive belt worn, damaged, or broken.

3.

Replace motion drive belt.

 

 

4.

Air trapped in transmission during

4.

Purge transmission.

 

 

 

shipment or servicing.

 

 

 

 

 

5.

Axle key missing.

5.

Install axle key at rear wheel. See "TO REMOVE

 

 

 

 

 

WHEEL" in the Service and Adjustments section.

 

 

 

 

 

 

 

 

Engine "back-

1.

Engine throttle control not set between

1.

Move throttle control between half and full speed

 

 

fires” when turn-

 

half and full speed (fast) position before

 

(fast) position before stopping engine.

 

 

stopping engine.

 

 

 

 

ing engine “OFF”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Engine dies when

1.

Reverse operation system (ROS) is not "ON"

1.

Turn ignition key to ROS "ON" position. See

 

 

tractor is shifted

 

while mower or other attachment is engaged.

 

Operation section.

 

into reverse

 

 

 

 

 

27

Page 27
Image 27
Husqvarna 532 44 05-66, 96045003000 owner manual Engine continues

532 44 05-66, 96045003000 specifications

The Husqvarna 96045003000,532 44 05-66 is a powerful and innovative riding mower designed for residential lawn care. This model stands out due to its combination of performance, durability, and user-friendly features, making it a popular choice among homeowners seeking an efficient mowing solution.

At the heart of the Husqvarna 96045003000 is its robust engine. It is equipped with a premium quality engine that offers reliable performance and excellent fuel efficiency. The powerful motor enables the mower to tackle even the toughest grass, ensuring a pristine finish to your lawn with every cut. Along with this efficiency, the mower is also designed to minimize emissions, promoting a more environmentally friendly operation.

A standout feature of this model is its advanced cutting deck technology. The 42-inch cutting deck size allows for a wide cutting path, reducing the number of passes needed to cover larger areas. The design of the cutting deck ensures even grass distribution and enhanced mulching capabilities, allowing users to finely chop grass clippings for better nutrient return to the soil.

Equipped with the latest in ergonomic design, the Husqvarna 96045003000 prioritizes user comfort. It features an adjustable seat that ensures a comfortable riding position for various user heights and preferences. The steering system provides precise control, making it easy to navigate around obstacles in your yard.

The mowing height can easily be adjusted to suit different grass types and conditions, providing versatility for varying lawn care needs. This adaptability allows homeowners to maintain their lawns at desired lengths for aesthetic appeal and health.

Additionally, Husqvarna incorporates advanced safety features into this model. The cutting blade automatically disengages when the operator leaves the seat, minimizing the risk of accidents. The mower also comes with easy-to-access controls to ensure that all functions are within reach, enhancing operational safety.

In conclusion, the Husqvarna 96045003000,532 44 05-66 offers an excellent balance of power, efficiency, and safety features. Its durable construction and advanced technology make it an essential tool for any homeowner looking to maintain a beautiful lawn with ease.