Premier Mounts PSD-BWL installation manual Mount Installation

RTM-L

Mount Installation

NOTE: The installation instructions that are contained in this manual refer only to the RTM-L. The installation instructions for the various bases that are used with the RTM-L will be included with those products.

NOTE: Prior to installing the RTM-L, the mounting configuration must already be assembled (base, support poles, etc.).

Mounting

Block

Set Screws

Cradle

Support

Poles

1.Slide the mounting block over and down the support poles.

2.To secure the mounting block to the support poles, tighten the four set screws (located on each side of the mounting block), using the 5/32" Allen wrench (supplied).

Page 8 Installation Instructions