Premier Mounts PSD-BWL installation manual Parts List, Installation Tools

PSD-BW/L

Parts List

Congratulations on purchasing the PSD-BW/PSD-BWL Nesting Cart. The PSD-BW/PSD-BWL Nesting Cart is shipped with all proper installation hardware and components. Please verify that none of these parts are missing and/or damaged before assembly. If there are parts missing and/or damaged, please stop the assembly and contact Premier Mounts (800) 368-7000.

NOTE: Some mounting configurations will allow for a “landscape” orientation. In these situations, when moving the PSD-BW/L Nesting Cart through a doorway, the orientation of the display must be returned to the “portrait” orientation. If not, maneuvering through the doorway could prove costly by damaging the display.

BW Base (Qty 1)

PSD-SPA (Qty 1)

3” Castors (Qty 4)

(2 locking,

2 non-locking)

Support Tubes

(Qty 2)

NOTE: Length will vary depending on model purchased.

M10 x 12mm Hex

Head Screws

(Qty 4)

M8 x 10mm Set Screws

(Qty 6)

M10 Flat Washers

(Qty 4)

21mm Caster Wrench

(Qty 1)

Installation Tools

Socket head wrench	Soft Material/ Blanket
M5 Allen Wrench (Supplied)	5/32” Allen Wrench (Supplied)
Installation Instructions	Page - 4 -