Casablanca Fan Company C3U72M owner manual Switch Housing Bracket/ Cap Installation

SWITCH HOUSING BRACKET/ CAP INSTALLATION

SWITCH HOUSING BRACKET/CAP HARDWARE (not to scale)

		Switch Housing
	Switch Housing Bracket	Mount Screw
		(Removed in Step 10)
Switch Housing Cap	(2)
		8-32 X 3/8
		(2)

Step 6a. Take the two switch housing bracket you removed in step 4g and snap it into the holes in the switch housing. This is to prevent any wires getting pushed down near the motor. Make sure no wires are in the way or pinched in these

NOTE: If you have purchased an accessory light fixture for this fan, please refer to the instructions included with the light fixture. If not, continue with Step 6b.

Step 6b. Line up the two clearance holes in the cap with the two threaded holes on the raised rim of the switch housing. Press the cap onto the switch housing to seat the guide pins into the alignment holes of the switch housing.

Step 6c. Using the two 8-323/8ʺ screws removed in Step 4h, install the cap onto the switch housing. Tighten the screws securely using the Phillips screwdriver.

8