INTRODUCTION
BEFOREYOU START
•CAUTION: Risk of electrical shock! All wiring must be in accordance with the National Electric Codes and the appropriate local electrical codes. The National Codes require proper grounding as a precaution against electrical shock. A qualified electrician should be consulted if you are unsure.
•This fan is designed to be installed on an existing electrical outlet box. The outlet box must be UL Listed for ceiling fan installations, if it is not, a new box must be installed. Casablanca extension poles are available for sloped or high ceiling installations.
•This ceiling fan requires a grounded electrical supply of 120 VAC, 60 Hz and a minimum 15 amp circuit. The maximum current requirement for the fan with light fixture is 3.8 amps. The fan uses about 1 amp or 100 watts. Maximum light current is 2.8 amps or 340 watts of lighting.
•Where wire nuts are employed, be sure all bare wires are within the connectors. When installing the canopy hatch, make sure all wires are within the canopy and that no wires are being pinched.
Unpacking
Before assembling and installing your ceiling fan, remove all parts from the shipping cartons and check them against the parts listed in the Parts List. Before discarding packaging material, be certain that all parts have been removed.
NOTE: For best performance and for your warranty to be valid, use only genuine Casablanca Fan Company blades, light fixtures, and accessories.
SAFE USE
•Inspect the contents of your carton for possible shipping or handling damage and report any such damage directly to your authorized Casablanca dealer.
•It is always a good idea to have an assistant to help with the installation.
•The blades in each pack are matched for equal weight to assure smooth fan operation. If more than one fan is being installed, be careful not to mix blades from different cartons.
•Never install a fan over a pool or spa.
•For safety reasons, the fan blades must be a minimum of 7 feet above the floor.
•In any installation, the tips of the blades must be at least 18 inches from the wall in order to provide sufficient clearance for the blades.
•Never insert anything into the path of the fan blades while the fan is in operation.
•When cleaning, painting, or working near your fan, be very careful of the fan and blades. Always turn the power OFF to the ceiling fan before servicing it, working on it, or replacing lightbulbs.
•Never operate a fan that has been damaged in any way. For assistance in obtaining service, call Casablanca Fan Company
FUSE BOX | CIRCUIT BREAKER |
Remove the fuse for | Trip the breaker for |
the circuit you will | the circuit you will |
be working on | be working on |
18ʺ
84 ʺ
2
