BLADE INSTALLATION
BLADE HARDWARE (not to scale)
Blade
Blade Screw and
Washer
Step 5a. Remove the five shipping blocks attached to the rotating motor plate using the provided Phillips screwdriver.
Step 5b. Attach each blade to a blade holder by first pressing the blade badge into the blade, then threading four blade screws into the screwholes and tightening using the screwdriver.
Repeat for each blade assembly.
Bla
Hol
Step 5c. Attach each blade/bladeholder assembly to the motor by threading two blade holder screws through the matching holes in the blade holder and the motor.Using the screwdriver, tighten the screws loosely.
After all five blade assemblies have been installed, tighten the screws securely using the screwdriver.
Blade
Holder
Blade Holder
Screw
(2 per blade)
Blade Holder Screws
(2 per blade)
7
