Casablanca Fan Company C3U72M owner manual VERSATOUCH2 Installation, Control Bracket Installation

VERSA•TOUCH2™ INSTALLATION

VERSA•TOUCH2™ INSTALLATION HARDWARE (not to scale)

	W-73
W-73	Control	12v Battery	Drywall	Wood	Screw	Screw
	Holder
			Anchor	Screw	6-32 X 3/8 "	6-32 X 1"
			6-32 (2)	1" (2)	(2)	(2)

CONTROL BRACKET INSTALLATION

SAFETY FIRST: To reduce the risk of electrical shock, this fan must be installed with an isolating

wall control/switch.

CAUTION! Do not use with wall dimmer.

Standard

Toggle

Switch

Inner

Mounting

Holes

Switch

Cover

Plate

Control Bracket

Standard Light Switch

Step a. Remove the two screws holding the switch cover plate. Do not remove the cover plate.

Step b. Orient the control bracket as shown and line up the two inner mounting holes with those on the switch.

Step C. Install and tighten screws using the provided Phillips screwdriver.

Wall Installation

Step a. Locate a 2x4 wall stud in a convenient location.

Step b. Orient the control bracket as shown over the 2x4 stud.

Step C. Use the 1" wood screws in either the inner or outer mounting holes. Install and tighten screws using the provided Phillips screwdriver.

Rocker

Type

Tabs Light

Switch

Outer

Mounting

Holes

	Switch
	Cover
Control	Plate
Bracket

Rocker Light Switch

Step A. Break off the two tabs by pushing outward.

Step B. Remove the two screws holding the switch cover plate. Do not remove the cover plate.

Step C. Orient the control bracket as shown and line up the two inner mounting holes with those on the switch.

Step D. Install and tighten screws removed in Step B by hand only.

NOTE: The wall anchors and 6-32 x 1" screws may be used in situations where mounting to a stud is not possible. Use the inner mounting holes. After securing the anchor, discard the anchor’s pointed screws and use the 6-32 decor ovalhead screws supplied.

Anchor

Panhead

Screw

	Drywall Anchor
Wood	Decor Ovalhead Screw
Screw 1"
	6-32 X 1"

10