3.Lower the universal bracket bar and display into the cradle (as to the left).
Nylon
Sleeve
NOTE: The circular portion of the universal bracket bar must rest inside the nylon sleeve. If seated improperly, the operation of the
Knurl Knob Mounting Points (a knurl knob may be 
placed in either mounting hole)
4.Insert an M6 knurl knob into the knurl knob mounting point and tighten.
Locking Screws
5.Tighten the two (2) Phillips head screws (located on the side of the mounting block) once the final position is attained.
Page 10 | Installation Instructions |
