Installation Instructions
Figure 3
The PSD-BW/L is designed to maximize storage space. When storing multiple carts, slide the Nesting Carts together as close as possible.
NOTE: Please adhere to any WARNING statements that will apply to the different mounting configurations the PSD-BW/L Nesting Cart will be used with.
Figure 4
Support Tubes
PSD-SPA Installation (Figure 3)
NOTE: Use of the
1.Slide the
2.Once the desired height has been determined, tighten the four (4) M8 x 10mm set screws, using the 5/32” Allen wrench (supplied) to secure the
5/32” Allen Wrench
Support Tubes
Page - 6 -