
Network Installation Overview
The installation of the printer on a network is accomplished using a combination of the Control Panel, native network utilities, one of the Xerox network software programs, and a Xerox printer driver.
The following procedure provides an overview of the major steps associated with installing the printer on a network.
To install the printer on a network:
1Physically connect the printer to the network
2Set up the network using native network utilities and procedures (if necessary)
3Enable connectivity at the printer Control Panel (if necessary)
4Configure printer connectivity settings from the workstation using one of the Xerox network software programs
5Install a Xerox printer driver on your workstation
6Print a test page.
These procedures may vary somewhat for the different network environments. Detailed instructions for installing and setting up the printer are provided in the network installation chapters of this guide.