Step 1. Set Up the Printer
To set up the printer for network connectivity:
1Run NWADMIN, NWADMIN32 or PCONSOLE to set up a printer and queue objects. Refer to the Novell documentation, if needed.
2Make certain that your printer is properly connected to the network with the appropriate cabling. See Chapter 1 Network Printer Features for detailed information on making the physical connections needed to install the printer on your network.
3Press the Administration button, located on the copier/printer Control Panel.
4Press Tools on the Touch Screen.
5Using the keypad, enter your Access Number and then press Enter on the Touch Screen. The default Access Number is 11111. It may have been changed by a System Administrator.
6Press Machine Setup on the Touch Screen. The list of available Items and their current settings is displayed.
7Press IP Address in the Items list, or use the scroll buttons to locate the IP Address field.
8Press Change Settings on the Touch Screen.
9The IP Address must be entered with leading zeroes. For example, an IP Address of 13.145.200.4 must be entered as 013145200004. After entering the IP Address using the keypad, press Save.
10Press Frame Type, located in the Items list, or use the scroll buttons to locate the Frame Type.
11Press Change Settings on the Touch Screen.
12After pressing the desired button for Frame Type, press Save.
13If you are using Token Ring, also set the Source Routing value.
Step 1. Set Up the Printer |
