Magnavox CD130MW9 owner manual Marker Setup, From the specific point which you set

Marker Setup

This feature allows you to assign a specifi c point on a disc to be called back later.

To set a marker

1During playback, press [MODE] repeatedly until “” or “” appears.

e.g.) DVD

/12 (SEARCH)

2Use [Cursor K/L] repeatedly until marker search menu

appears.

e.g.) DVD

or

3Use [Cursor s / B] to select an available marker within 60 seconds.

e.g.) DVD

or

4When the playback reaches the point at which you want to set a marker, press [ENTER].

• Marker is now set.

e.g.) DVD

5Press [RETURN ] to exit.

RETURN

	INTRODUCTION
To return to the marker later	CONNECTION

1To select a desired marker, repeat steps 1 to 3 in “To set a marker“.

	e.g.) DVD	INITIALSETTING
2 Press [ENTER] at the desired marker to start playback
from the specific point which you set.		WATCHINGTV
	e.g.) DVD
Note:		OPTIONAL
• Marker search menu will disappear in about 60 seconds
when there is no input.
• You can mark up to 10 points.		SETTING
press [CLEAR].
• To clear a marker, select the marker to be cleared, and then
• Ejecting the disc or turning off the power will erase all mark-
ers.		OPERATINGDVD
• Selecting “	” at step 3 in the section “To set a marker”
will also erase	all markers.
		DVD SETTING
		TROUBLESHOOTING
		INFORMATION
		ESPAÑOL

31

EN