Mitsubishi Electronics TG-2000A Installation, G-2000A Setup, Preparing for installation

5.Installation

5.1Pre-installation Steps

Preparing for installation

Before installing the TG -2000A application, do the following checks and preparatory steps.

Steps	Action	Details		How to
1	Check the OS	Check the OS Service Pack version.	*	If not the correct version,
		• Windows XP Professional		refer to the attached
		• Windows 2000 Professional: SP2		documentation, “Installing
		and above	•	Windows 2000/XP” and
				upgrade the OS.
2	Check the memory	Check that there is at least 128 MB of	*	If necessary, add more
		RAM (256MB or more is		RAM.
		recommended.)
3	Check the HDD free	Check that there is at least 2GB of free	*	Refer to the Windows
	space	space on the C drive. (OS already set		instruction manual for
		up)		more details.
4	Printer settings	Install the printer driver and check that	*	For details, refer to the
		printing is possible.		attached instruction
				manual.
5	Set the date and time	In the Windows Control Panel, select	*	For details, refer to the
		“Date and Time” and set the date, time		Windows users manual.
		and region
6	Screen size and color	At the “display” in the Windows Control	*	For details, refer to the
	settings	Panel, set the screen size to 1024 × 768		Windows users manual.
		or larger and the color to 65536 colors
		(High Color (16-bit)) or more.
7	Automatic login	Check that the Auto log-in is set. *2	*	For the setting check pro-
	settings			cedure, see Appendix 2
				Auto Log-in Check Proce-
				dure.
8	Network settings	Check that the network settings have	*	For details, refer to the
		been performed (even if the adapter is		Windows users manual.
		not connected).

*1 Check when using the printer.

*2 Auto log-in sets the automatic start-up without entering the log-in name or password at the OS start -up.

Note:

•The TG -2000A will not be started automatically after starting (rebooting) the personal computer when the TG-2000A is set to Auto reboot, unless the Auto log-in is set. When the TG -2000A is set to Auto re-boot, be sure to set the Auto log-in.

5.2T G-2000A Setup

5.2.1 Setup

The following shows the TG-2000A setup disk (CD-ROM) folder configuration and files. However, it only describes the files to be run.

CD-ROM drive\Setup\Step1\MSDEInst.bat \Step2\DbSetup.bat \Step3\SetupTG.exe

[Reference] CD-ROM directory structure

readme.txt	: Directory structure and setup precautions of this CD-ROM
\Setup	: Set -up folder
\Tool	: Air-conditioning charge calculation support tool (chargecalc.xls)
\Manual	: Operation Manual
	9