Mitsubishi Electronics TG-2000A operation manual Password S e t-up, Change the password

8 . 11 Password S e t-up

The initialization password and maintenance password can be changed.

Change the password.
	[Procedure]
	1)	Click [Password set -up] button.
		Click the [Password change] button at the Initial
		window user setup group. The New password
		set -up window appears.
	2)	Select the target to be changed.
		Click and select the target to be changed.
		(Password type)
		• Initialization password (System administra-
		tor password)
		• Maintenance password (Maintenance user
		password)
	3)	Enter the password at New password.
		Set the password at New password.
	4)	Enter the password for verification.	New password set-up window
		When a new password was set at Step 2), set

the same password for verification.

5)Click [OK] button after finishing the setting.

Check the display contents and click the [OK] button.

*When the [Cancel] button is clicked, this setting is terminated to return to the initial screen.

Maintenance tip

•Always memorize the new password. If you forget the password, you cannot open the Initial window.

Note:

•When the Initial window is opened by initialization password, the Initialization and Maintenance passwords can be changed at the Password change window.

•When the Initial window is opened by maintenance password, only the Maintenance password can be changed at the New password set -up screen.

52