Mitsubishi Electronics TG-2000A Unit Data Maintenance, Maintaining Apportioned Unit Data

[Without WHM connection]

Proportional division parameter for the outdoor unit:

The proportional division parameter calculated with the power used by the indoor unit concerned, as that used by the outdoor unit (cryogenic) using the proportionally divided reference data, indoor unit capacity, and other data selected.

Proportional division parameter for indoor unit:

The proportional division parameter calculated with the power used by the indoor unit concerned, as that used by the indoor unit itself (power and subsidiary heating) using the fan operation time, fan capacity, and other parts of the indoor unit, etc.

[With WHM connection]

Apportioned electric power for outdoor unit:

The electric power proportionally divided from the electric power used by WHM with the power used by the indoor unit concerned, as that used by the outdoor unit (cryogenic) using the proportionally divided reference data, indoor unit capacity, and other data.

Apportioned electric power for indoor unit:

The electric power proportionally divided from the electric power used by WHM with the power used by the indoor unit concerned, as that used by the indoor unit itself (power and subsidiary heating) using the fan operation time, fan capacity, and other parts of the indoor unit, etc.

9.2.3 Unit Data Maintenance

The proportional division data for every indoor unit may be changed. This screen displays the capacity save ratio, thermo-ON time, the FAN operating time or subsidiary heater operation time for regular hours and off hours.

Maintaining Apportioned Unit Data

[Procedure]

1)Select the selection method.

Click the [Select from G-50] or [Select from charging block] check box in the upper left part of the charge data maintenance screen.

2-1)Select the selection method from G-50A. Select the [Select from G-50] button in accordance with the procedure shown in 1), and click the mark in the [G-50 No.] selection box to select the G-50A No. to be displayed. When it is selected, the indoor unit connected to the G-50A is displayed in the unit selection column.

2-2) Select the selection method from the charging block. Select the [Select from charge block] button in accordance with the procedure shown in 1), and click the mark in the [Select of charge block] selection box to select the charge block to be displayed. When it is selected, the group set to the charge block is displayed in the unit selection column.

Click the group, which sets the indoor unit to be displayed. When it is selected, the indoor unit set to the group is displayed in the unit selection column.

2-3) Select the selection method from WHM.

Select the [Select from WHM] button in accordance with the procedure shown in 1), and click the mark in the WHM box. When it is selected, the unit set to WHM is displayed in the unit selection column. If the outdoor unit is clicked when the outdoor unit is displayed, the indoor unit composing of the outdoor unit is displayed in the unit selection column.

Select button G-50A No. select box

Charge data maintenance screen

(select from G-50A)

Charge block select

Group select

Charge data maintenance screen

(select from charge block)

56