Mitsubishi Electronics TG-2000A operation manual Charging Remedy, Output file data format

G-50A select button

Output the operation amount data, which is the charge parameters, to the file. [Procedure]

1)Select [charge parameter output] menu. Select the [charge parameter output] located in the [Tool] menu in the initial window where the charge parameter output screen is displayed.

*Note that this screen cannot be selected in the Management screen.

2)Select the G-50.

When the “” button for selecting the G-50A is clicked, the G-50A connected is displayed. Select the G-50A to be output.

3)Set the interval.

Use the “/” buttons to set the year, month, and day of the objective interval. An interval from the previous day to 122 previous days can be set.

*The setting is executable regardless of whether the data for the date concerned exists or not.

4)Set the file output destination.

Set the file output destination folder. An existing folder can be selected by clicking the [Refer] button.

Output term setting

Output file name setting

Charge parameter output (set-up) screen

Note:

•When a nonexistent folder is described as the file output destination and the [Save] button is clicked, the file is saved by creating a new folder.

5)Set the save filename and click the Output button.

After setting the output destination and file name, click the [Output] button. The file is saved. After finishing, this screen closes.

*Click the [Cancel] button to return to the Initial window.

<Output file data format>

The data format is CSV format. Data is output in ascending order.

A sample that uses MS-EXCEL to fetch an output file is shown here.

Note:

• When within a time (daytime)/outside (night) is not set, each integrated value is assumed to be (daytime) and the (night) value does not increase.

• When the integrated value does not exist, “-99” is set or the integrated value is left blank.

Output file Excel fetch screen (sample)

9.5Charging Remedy

Performing charging remedy

When charge apportioning was not performed (electric power not apportioned) due to watt hour meter failure or data was destroyed by HDD failure, the air-conditioning charge can be easily computed by using this remedial function.

62