8.7.4 Creation of a plane view (Step 3)

Follow these steps to create a floor plane for each floor. This floor plane is used in air conditioning operation and supervision for each floor. If not displaying a floor plane, it is not necessary to create one.

Create a floor plane for each floor

 

[Procedure]

 

 

Base plane

 

 

 

 

Floor plane

 

1) Click the Base [Change]

button.

 

 

 

In the Floor Plan Settings window, click the

 

[Change] button to edit the flow chart. The paint

 

brush appears.

 

 

 

 

Maintenance Tip

 

 

Floor selection

 

 

 

 

 

• When Paint Brush Mode is activated, the file

 

name and graphic size is set and should not

 

be changed. If changed, the floor plane may

 

not display correctly.

 

 

 

 

 

 

 

2) Create a floor plane flow chart .

 

 

Create a floor plane flow chart with the paint brush.

 

* For details, see the Windows 2000/XP users

 

guide.

 

 

Creation of a plane view screen

 

3) Exit Paint Brush Mode.

 

 

 

 

 

 

 

Click the file menu and select the Exit Paint Brush

 

option. Select “Yes” on “the save confir- mation

 

screen”.

 

 

 

 

4) Select a floor using the “

/ ” button

 

 

Use the “ / ” button to select the floor to be

 

modified.

 

 

 

 

5) Click the Base [Copy ] button.

 

To apply the created flow chart to the selected

 

floor, click the Base [Copy] button. It is not

 

necessary to click the Base Copy button when

 

creating a new floor plane.

 

6) Click the [Change] button

 

To create or edit a floor plane for the selected floor,

Paint Brush window (initial state)

click the [Change] button. The paint brush starts

 

up, and the floor plane can be edited.

 

7)Create a floor plane.

Use the paint brush to edit the floor plane of the selected floor.

8)Exit the paint brush.

Click the paint brush File menu and select the Exit Paint Brush option.

9)Click [OK] button.

After a floor plane has been created, click the [OK] button

*When the [Cancel] button is clicked, this setting is terminated to return to the initial screen.

8.7.5 Set-up of floor name and G -50 (Step4)

Follow these steps to set the G-50A for each floor.

Set floor and G-50A assignments [Procedure]

1)Select the G-50A.

In the Floor and G/W Options window, click the check box of the G-50A to be assigned to each floor.

: Unassigned

: Assigned

Assign a G-50 to every floor. (Up to 5 of G-50A can be set to each floor.)

2)Click the [OK] button.

When finished with these settings, click the [OK] button.

*When the [Cancel] button is clicked, this setting is terminated to return to the initial window.

Check box

Set-up of floor name and G-50A screen

36

Page 39
Image 39
Mitsubishi Electronics TG-2000A operation manual Creation of a plane view Step, Set-up of floor name and G -50