Mitsubishi Electronics TG-2000A operation manual Day before recovery day

	Preceding month’s count end day.
4) Operation amount backup monitoring
Monitor backup of the operation amount from the backup	Day before recovery day
day to the recovery day. Set the start day as the backup
day and the end day as the day before recovery day.

Start day	Backup	Failure	Recovery	Now End day
	¢	ê	ó	˜
			Monitor interval
	Count (1 month)

Current value

Operation amount data monitoring screen

Note:

•Operation amount data backup monitoring for the failure day is also possible.

•Since the operation amount data is the integrated value, the data for the back-up day must also be monitored.

5)Wait until the day after the settlement -of-accounts day .

Continue normal operation up to the day after the settlement -of-accounts day.

Note:

•The system operates normally up to the day after the settlement -of-accounts day because remedial apportioning is performed for one month.

6)Start remedial apportioning.

Start remedial apportioning by clicking the [Remedial apportioning] button in the initial window. This is described with the time series example below.

Remedial interval	Backup Failure		Recovery
		ê		ó
Portion for month before last (normal)	Portion for last month (remedial)

Now

˜

Note

• Perform remedial proportioning from the day after the settle-of-accounts day. However, except when it is different from the normal settlement -of-accounts term. Remedial apportioning can begin two days after the recovery day. (Only when the day after the recovery day was normally charged.)

7) Settlement -of-accounts term setting

Set the settlement-of-accounts term (start day and end day) at the remedial apportioning setting screen. The initial value is the settlement-of-accounts term of the previous month.

8) Total air-conditioning charge setting

Set the total air-conditioning charge for the settlement - of-accounts term.

Note:

• When the settlement -of-accounts term is one month and includes a standard charge,

set the total air-conditioning charge including this standard charge.

Remedial apportioning setting window

•When there is one power charge, the total air-conditioning charge does not have to be set. This item appears in gray.

9)Include/Not include standard charge setting

When the settlement-of-accounts term is one month, [Include] or [Not include] standard charge can be selected. Set whether or not the standard charge is to be included.

10)Remedial interval setting

Set the remedial apportioning interval. The remedial start day is the backup day and the remedial end day is the recovery day.

68