5If the IP Address Resolution is Static, make sure that the IP Address, Host Name, Subnet Mask, and Gateway Address are set to the correct values. If the IP Address Resolution is DHCP, these fields will be read- only.
6Click Apply New Settings if any changes were made.
7Provide a User Name and Password when prompted. (The default User Name is Admin with a capital "A" and the default Password is 11111.)
8Power off and power on the copier/printer. Allow at least 30 seconds between powering off and powering on the printer. A Configuration Report will print in approximately 5 minutes. The information on the Configuration Report can be very helpful in completing the network installation and troubleshooting problems with your copier/printer.
