SERVICE AND ADJUSTMENTS

TO ADJUST HANDLE (See Fig. 21)

The handle on your lawn mower has three (3) height posi- tions - adjust to height that suits you.

1.Remove knob and carriage bolt on one side of the lower handle.

2.While holding handle assembly, remove knob and carriage bolt from opposite side, align hole in handle with desired hole in handle bracket and reassemble bolt and knob and tighten securely.

3.Align opposite side of handle with same positioning hole and secure with bolt and knob.

BOLT

KNOB

HANDLE

BRACKET

HIGH

MEDIUM

LOW

FIG. 21

ENGINE

Maintenance, repair, or replacement of the emission con- trol devices and systems, which are being done at the customers expense, may be performed by any non-road engine repair establishment or individual. Warranty repairs must be performed by an authorized engine manufacturer's service outlet.

ENGINE SPEED

Your engine speed has been factory set. Do not attempt to increase engine speed or it may result in personal injury. If you believe that the engine is running too fast or too slow, take your lawn mower to an authorized service center for repair and adjustment.

CARBURETOR

Your carburetor is not adjustable. If your engine does not operate properly due to suspected carburetor problems, take your lawn mower to an authorized service center for repair and/or adjustment.

IMPORTANT:NEVERTAMPERWITHTHEENGINEGOVERNOR, WHICH IS FACTORY SET FOR PROPER ENGINE SPEED. OVERSPEEDING THE ENGINE ABOVE THE FACTORY HIGH SPEED SETTING CAN BE DANGEROUS. IF YOU THINK THE ENGINE-GOVERNED HIGH SPEED NEEDS ADJUSTING, CONTACTYOUR NEARESTAUTHORIZED SERVICE CENTER, WHICH HAS PROPER EQUIPMENT AND EXPERIENCE TO MAKE ANY NECESSARY ADJUSTMENTS.

STORAGE

Immediately prepare your mower for storage at the end of the season or if the unit will not be used for 30 days or more.

LAWN MOWER

When lawn mower is to be stored for a period of time, clean it thoroughly, remove all dirt, grease, leaves, etc. Store in a clean, dry area.

1.Clean entire lawn mower (See “CLEANING” in the Maintenance section of this manual).

2.Lubricate as shown in the Maintenance section of this manual.

3.Be sure that all nuts, bolts, screws, and pins are securely fastened. Inspect moving parts for damage, breakage and wear. Replace if necessary.

4.Touch up all rusted or chipped paint surfaces; sand lightly before painting.

HANDLE (See Figs. 22 and 23)

You can fold your lawn mower handle for storage.

1.Loosen the two (2) handle knobs on sides of the upper handle and allow handle to fold down to the rear.

2.Remove the two (2) handle knobs and carriage bolts on sides of the lower handle and pivot entire handle assembly forward and allow it to rest on mower.

3.Reinstall knobs and carriage bolts to lower handle or handle brackets for safe keeping.

When setting up your handle from the storage position, the lower handle will require manually locking into the mowing position.

IMPORTANT: WHEN FOLDING THE HANDLE FOR STORAGE OR TRANSPORTATION, BE SURE TO FOLD THE HANDLE AS SHOWN OR YOU MAY DAMAGE THE CONTROL CABLES.

16

Page 16
Image 16
Husqvarna 961450011 warranty Storage, To Adjust Handle See Fig, Carburetor, Handle See Figs

961450011 specifications

The Husqvarna 961450011 is a highly versatile and dependable lawn mower designed for homeowners who seek to maintain a pristine lawn with ease and efficiency. This model features a durable and efficient engine, ensuring a powerful performance capable of handling various types of grass and terrain. One of its main features is the robust 17 HP Briggs & Stratton engine, which provides ample power for cutting through thick and dense grass, while also ensuring fuel efficiency.

Equipped with a 42-inch cutting deck, the Husqvarna 961450011 allows for wider cutting paths, meaning larger areas can be mowed in less time compared to traditional push mowers. The cutting deck is designed with a clever design for optimal grass dispersion, preventing clumping and ensuring a neat finish. This deck is also adjustable, offering multiple cutting heights to cater to different grass types and personal preferences. Whether you prefer a close trim or a slightly higher cut, this mower can adapt to your needs.

Another noteworthy technology incorporated into this model is the hydrostatic transmission, which allows for smooth and precise speed adjustments. This feature enhances the operator's control, making it easier to maneuver around obstacles and navigate tight spaces. Additionally, the steering wheel control offers a comfortable grip and promotes easy handling, further reducing operator fatigue during longer mowing sessions.

Safety is a priority with the Husqvarna 961450011. It comes with a safety switch that ensures the engine cuts off when the operator leaves the seat, minimizing the risk of accidents. The design also includes an innovative reverse mowing feature, enabling grass cutting while moving backward, which adds convenience, especially in complex yard layouts.

Moreover, the mower boasts an ergonomic design, featuring a comfortable seat and user-friendly controls, allowing any operator, regardless of experience, to effectively manage their mowing tasks. The durability of the construction ensures that users will enjoy years of reliable service, while the sleek design encapsulates both form and function.

In summary, the Husqvarna 961450011 is a reliable, feature-rich lawn mower. Its powerful engine, adjustable cutting deck, hydrostatic transmission, and emphasis on safety make it an excellent choice for homeowners looking to maintain their lawns seamlessly and effectively.