MAINTENANCE

•To check blade balance, you will need a 5/8" diameter steel bolt, pin, or a cone balancer. (When using a cone balancer, follow the instructions supplied with balancer.)

NOTE: Do not use a nail for balancing blade. The lobes of the center hole may appear to be centered, but are not.

•Slide blade on to an unthreaded portion of the steel bolt or pin and hold the bolt or pin parallel with the ground. If blade is balanced, it should remain in a horizontal position. If either end of the blade moves downward, sharpen the heavy end until the blade is balanced.

TO CHANGE ENGINE OIL (See Figs. 15 & 16)

NOTE: Before tipping lawn mower to drain oil, empty fuel tank by running engine until fuel tank is empty.

1.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

2.Remove oil fi ll cap/dipstick; lay aside on a clean sur- face.

3.Tip lawn mower on its side as shown and drain oil into a suitable container. Rock lawn mower back and forth to remove any oil trapped inside of engine.

GRASS CATCHER

•The grass catcher may be hosed with water, but must be dry when used.

•Check your grass catcher often for damage or dete- rioration. Through normal use it will wear. If catcher needs replacing, replace only with approved replace- ment catcher shown in the Repair Parts section of this manual. Give the lawn mower model number when ordering.

GEAR CASES

•To keep your drive system working properly, the gear cases and area around the drive should be kept clean and free of trash build-up. Clean under the drive cover twice a season.

•The gear cases are filled with lubricant to the proper level at the factory. The only time the lubricant needs atten- tion is if service has been performed on the gear case.

ENGINE

LUBRICATION

Maintenance, repair, or replacement of the emission control devices and systems, which are being done at the custom- ers expense, may be performed by any non-road engine repair establishment or individual. Warranty repairs must be performed by an authorized engine manufacturer’s service outlet.

LUBRICATION

Use only high quality detergent oil rated with API service classification SG–SL. Select the oil's SAE viscosity grade according to your expected operating temperature.

CONTAINER

FIG. 15

4.Wipe off any spilled oil from lawn mower or side of engine.

5.Fill engine with oil. Slowly pour oil down the oil fi ll spout into the engine.

6.Wait one minute to allow oil to settle. Use guage on oil fi ll cap/dipstick for checking level. Insert dipstick into the tube and rest the oil fi ll cap on the tube. DO NOT thread the cap into the tube when taking reading.

OIL FILL CAP /

DIPSTICK

UPPER

MARK

LOWER MARK

NOTE: Multi-viscosity oils (5W30, 10W30 etc.) improve starting in cold weather, and you should check your engine oil level frequently to avoid possible engine damage from running low on oil.

Change the oil after every 25 hours of operation or at least once a year if the lawn mower is not used for 25 hours in one year.

Check the crankcase oil level before starting the engine

 

and after each fi ve (5) hours of continuous use. Tighten oil

12

plug securely each time you check the oil level.

FIG. 16

7.Continue adding small amounts of oil and rechecking the dipstick until it reads full. DO NOT overfi ll, or engine will smoke on startup.

8.Always be sure to retighten oil fi ll cap/dipstick before starting engine.

9.Reconnect spark plug wire to spark plug.

Page 11 Page 13
Page 12
Image 12
Husqvarna 961450011 warranty To Change Engine OIL See Figs, Grass Catcher, Gear Cases, Lubrication
Page 11 Page 13

961450011 specifications

The Husqvarna 961450011 is a highly versatile and dependable lawn mower designed for homeowners who seek to maintain a pristine lawn with ease and efficiency. This model features a durable and efficient engine, ensuring a powerful performance capable of handling various types of grass and terrain. One of its main features is the robust 17 HP Briggs & Stratton engine, which provides ample power for cutting through thick and dense grass, while also ensuring fuel efficiency.

Equipped with a 42-inch cutting deck, the Husqvarna 961450011 allows for wider cutting paths, meaning larger areas can be mowed in less time compared to traditional push mowers. The cutting deck is designed with a clever design for optimal grass dispersion, preventing clumping and ensuring a neat finish. This deck is also adjustable, offering multiple cutting heights to cater to different grass types and personal preferences. Whether you prefer a close trim or a slightly higher cut, this mower can adapt to your needs.

Another noteworthy technology incorporated into this model is the hydrostatic transmission, which allows for smooth and precise speed adjustments. This feature enhances the operator's control, making it easier to maneuver around obstacles and navigate tight spaces. Additionally, the steering wheel control offers a comfortable grip and promotes easy handling, further reducing operator fatigue during longer mowing sessions.

Safety is a priority with the Husqvarna 961450011. It comes with a safety switch that ensures the engine cuts off when the operator leaves the seat, minimizing the risk of accidents. The design also includes an innovative reverse mowing feature, enabling grass cutting while moving backward, which adds convenience, especially in complex yard layouts.

Moreover, the mower boasts an ergonomic design, featuring a comfortable seat and user-friendly controls, allowing any operator, regardless of experience, to effectively manage their mowing tasks. The durability of the construction ensures that users will enjoy years of reliable service, while the sleek design encapsulates both form and function.

In summary, the Husqvarna 961450011 is a reliable, feature-rich lawn mower. Its powerful engine, adjustable cutting deck, hydrostatic transmission, and emphasis on safety make it an excellent choice for homeowners looking to maintain their lawns seamlessly and effectively.
Top Page Image Contents