Environmental Information
ENVIRONMENTAL INFORMATION Husqvarna UK Ltd. are manufactured under an Environmental Management System (ISO 14001) using, where practical, components manufactured in the most environmentally responsible manner, according to company procedures, and with the potential for recycling at the end of the products’ life.
•Packaging is recyclable and plastic components have been labelled (where practical) for categorised recycling.
•Awareness of the environment must be considered when disposing of
•If necessary, contact your local authority for disposal information.
DISPOSAL OF FUELS AND LUBRICATING OILS
•Wear protective clothing when handling any fuels and lubricants.
•Avoid contact with skin.
•Remove petrol and engine oil before transporting the product.
•Contact your local authority for information of your nearest Recycling/Disposal Station.
Do NOT dispose of used fuels/oils with household waste
Waste fuels/oils are harmful, but can be recycled and should be disposed of through the recognised facilities.
Do NOT dispose of used fuels/oils to water.
Do NOT incinerate
EC Declaration of Conformity
Husqvarna UK Ltd., Aycliffe Industrial Park
Newton Aycliffe, Co. Durham, DL5 6UP, England
Declare under our sole responsibility that the product(s);
Category | Petrol Lawnmower |
Type(s) | 540, 540D |
Identification of Series | See Product Rating Label |
Year of Construction | See Product Rating Label |
Conforms to the essential requirements & provisions of the following EC Directives:
98/37/EC (until 31.12.09), 2006/42/EC (from 01.01.10), 2004/108/EC, 2000/14/EC
based on the following EU harmonized standards applied:
EN 836, EN ISO 14982, EN ISO 20643, EN ISO 3744, EN ISO 11201
The maximum A weighted sound pressure level LpA at the operator’s position, recorded on a sample of the above product(s) cor- responds to the Level given in the table.
The maximum hand / arm vibration weighted value measured according to EN ISO 5349 on a sample of the above product(s) corresponds to the Value given in the table.
2000/14/EC: The Measured Sound Power LWA & Guaranteed Sound Power LWA values are according to the tabulated figures.
Conformity Assessment Procedure | Annex VI |
Notified Body | Intertek, Cleeve Road |
| Leatherhead, Surrey |
Newton Aycliffe 12/12/2008 | KT22 7SB, England |
| |
M.Bowden |
|
Research & Development Director |
|
Husqvarna UK Ltd. |
|
Type | 540 | 540D |
Width of Cut (cm) | 40 | 40 |
Speed of Rotation of Cutting Device (rpm) | 3000 | 3000 |
Measured Sound Power LWA (dB(A)) | 95 | 95 |
Guaranteed Sound Power LWA (dB(A)) | 96 | 96 |
Level (dB(A)) | 81 | 81 |
Value (m/s2) | ||
Weight (Kg) | 5 | 5 |
| 21 | 23 |
Husqvarna UK LTD.
Aycliffe Industrial Park
NEWTON AYCLIFFE
Co.Durham DL5 6UP
ENGLAND
Telephone - 01325 302302 Fax - 01325 310339
Our policy of continuous improvement means that the specification of products may be altered from time to time without prior notice.