Husqvarna 115 149727 R01, 966004401 8INSTALLING WEIGHT KIT, 9MOUNTING COVER ASSEMBLY, Assembly

ASSEMBLY

8INSTALLING WEIGHT KIT

1.Bolt cast weight to weight brackets using 3/8-16 x 1¼ bolts and four nuts.

2.Slide both weight brackets over the front tube on the frame. Be sure to position the weight assembly in the center of the frame.

3.Secure with 3/8-16 x 3½ bolts and four nuts.

Front Tube

Weight Plate 3½ Bolt

Weight Bracket

CAUTION

DO NOT operate mower with grass catcher without front weight installed.

9MOUNTING COVER ASSEMBLY

NOTE: Assistance from another person may ease mounting the cover assembly to mower.

1.Lift and rotate cover to align the cover brackets with support assembly tubes.

2.Slide the cover down over the support tubes until secure.

10INSTALLING SPACER PLUGS

1.Remove plastic end caps from the center bag support arm. Fully insert spacer plug into the end of the support tube. It may be necessary to tap the spacer into place with a hammer or mallet.

Replace the plastic end cap back over the spacer.

The additional extension will hold the hood more securely when latched.

Remove center	Insert spacer and
	replace cap
end cap

11