maintenance

Battery

Your mower is equipped with a maintenance free battery and does not need servicing. However, periodic charging of the battery with an automotive type battery charger will extend its life.

Keep battery and terminals clean.

Keep battery bolts tight.

See charge for charging times.

WARNING!

Always wear eye protection when around batteries.

Cleaning battery and terminals

Corrosion and dirt on the battery and terminals can cause the battery to “leak” power.

1.Open the terminal access doors.

2.Disconnect BLACK battery cable first, then the RED battery cable and remove the battery from the machine.

3.Rinse the battery with plain water and dry.

4.Clean terminals and battery cable ends with wire brush until shiny.

5.Coat terminals with grease or petroleum jelly

6.Reinstall battery.

Replacing battery

1.Lift seat and rotate forward.

2.Open terminal access doors

3.Using two ½" wrenches disconnect BLACK battery cable then RED battery cable.

4.Using a 7/16 wrench, remove the bolts on either side of the terminal guard and lift off guard.

5.Carefully remove the battery from the mower.

6.Install new battery with terminals in the same position as the old battery.

7.Reinstall battery terminal guard.

8.First connect RED battery cable to positive (+) battery terminal with hex bolt and hex nut.

9.Connect BLACK grounding cable to negative (-) battery terminal with remaining hex bolt and hex nut.

10.Close access doors.

11.Lower seat.

STANDARD

STATE

APPROXIMATE BATTERY CHARGING TIME*

 

 

TO FULL CHARGE AT 80OF / 27OC

BATTERY

OF

 

 

 

 

 

Maximum Rate at:

 

 

 

 

 

 

CHARGE

 

 

 

 

 

50 Amps

30 Amps

20 Amps

10 Amps

 

 

 

 

 

 

 

 

12.6V

100%

- FULL CHARGE -

 

 

 

 

 

 

12.4V

75%

20 min.

35 min.

48 min.

90 min.

 

 

 

 

 

 

12.2V

50%

45 min.

75 min.

95 min.

180 min.

 

 

 

 

 

 

12.0V

25%

65 min.

115 min.

145 min.

280 min.

 

 

 

 

 

 

11.8V

0%

85 min.

150 min.

195 min.

370 min.

 

 

 

 

 

 

*Charging time depends on battery capacity,

condition, age, temperature and efficiency of charger

IMPORTANT INFORMATION

Do not attempt to open or remove caps or covers. Adding or checking level of electrolyte is not necessary.

Always use two wrenches for the terminal screws.

WARNING!

Do not short battery terminals by allowing a wrench or any other object to contact both terminals at the same time. Before connecting battery, remove metal bracelets, wristwatch bands, rings, etc.

Positive terminal must be connected first to prevent sparks from accidental grounding.

2

1

2

CZ-22

1.Terminal guard

2.Access doors

Battery cleaning and installation

36

Page 36
Image 36
Husqvarna 966502301, MZ6128, 115 312526R1 manual Battery, Replacing battery

966502301, 115 312526R1, MZ6128 specifications

The Husqvarna MZ6128 is a significant addition to Husqvarna's impressive lineup of zero-turn mowers, designed specifically for homeowners and professionals seeking superior performance, durability, and ease of use.

One of the key features of the MZ6128 is its robust 28-horsepower engine, engineered to provide ample power for mowing large areas efficiently and effectively. This powerful engine, combined with a cutting width of 61 inches, allows users to cover substantial ground in less time, making lawn care a less time-consuming task. The mower also features a fabricated cutting deck, which enhances durability and longevity, ensuring that it withstands the rigors of regular landscaping duties.

The MZ6128's zero-turn capability is another standout characteristic. The design allows for unparalleled maneuverability, enabling the mower to navigate tight spaces and perform sharp turns with precision. This feature is particularly beneficial for homeowners with intricate lawn layouts or professional landscapers who require agility while mowing.

In terms of comfort and usability, Husqvarna has equipped the MZ6128 with a high-back seat that provides excellent support for extended periods of mowing. The ergonomic controls are designed to reduce user fatigue, enhancing overall user experience. Additionally, the large, durable rear wheels ensure stability and traction across various terrains, including uneven ground.

The mower's integrated hydrostatic transmission offers smooth acceleration and easy control over speed adjustments, allowing users to tailor their mowing experience based on conditions. This feature ensures that the MZ6128 can handle various grass types and heights without straining the engine.

Maintenance is made easy with the MZ6128, thanks to accessible components and a straightforward design, which helps users perform regular checks and servicing without hassle. Husqvarna's commitment to quality is evident in the build and materials, reducing the frequency of repairs and the overall long-term cost of ownership.

Overall, the Husqvarna MZ6128 exemplifies a blend of performance, comfort, and durability, making it a valuable investment for anyone serious about maintaining a pristine lawn. Whether for residential use or professional landscaping, the MZ6128 stands out as a reliable and efficient solution for a variety of mowing needs.