OPERATION
Manual Transport
WARNING!
No adjustments or maintenance should be carried out unless:
•the engine stopped
•the ignition key removed
•the parking brake activated
When pushing or pulling the mower, engage the IZT (Integrated Zeroturn Transaxle) bypass linkages. The linkages are located on each side of the rear of the unit below the rear engine plate.
Raise the deck to the highest (transport) position.
Pull the bypass linkages up and out of the keyhole slots. Release the lever with the head outside the bracket and held into the bypass setting.
To reengage the IZTs to drive, reverse the above procedure.
2 |
1 |
1.IZT locked into the bypass position
2.Linkage lever, engaged
Right side, IZT linkage
33
