Manuals / Husqvarna / Lawn and Garden / Lawn Mower

Husqvarna RZ4219, 966582201 After the First 10 Hours, Hour Service, Service Journal, Action

Models: RZ4219 RZ4219 BF 966809001 966582201

1 56

Page 51

	SERVICE JOURNAL


Action		Date, mtr reading, stamp, sign

After the First 10 Hours
1. Change engine oil.

25-Hour Service
1.	Check the fuel pump’s air filter.
2.	Check the hydraulic system’s oil level.
3.	Check the tire pressures.
4.	Lubricate the belt adjuster, mower deck.
5.	Lubricate the belt adjuster, hydraulic pumps.
6.	Check/clean the engine’s cooling air intake.
7.	Clean air filter dust cap.

Page 51

Image 51

Husqvarna RZ4219 warranty After the First 10 Hours, Hour Service, Service Journal, Action, Date, mtr reading, stamp, sign

Contents

RZ4219 / 966809001 RZ4219 BF Operator Manual2011 All rights reserved Orangeburg, SC. Printed in U.S.A Driving and Transport on Public Roads CONTENTSPage Driving and Transport on Public Roads INTRODUCTIONCongratulations GeneralGood Service Manufacturing NumberINTRODUCTION SYMBOLS AND DECALS Xxxx xxxxxx xxxxx xxxx xxxxxx xxxxxxxxx. xx xxxxxxxx xxxxxxIMPORTANT INFORMATION Manual SYMBOLS AND DECALSTHIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET SAFETYSafety Instructions SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATHOperate machine only in daylight or good artificial light SAFETYNever use the machine when barefoot Personal Safety EquipmentWhen using the machine, approved at hand when using the machineSAFETY ChildrenAllow engine and exhaust system to cool before refueling Safe Handling of GasolineThe engine and the exhaust system become very hot during operation There is risk for burns if touchedGeneral Maintenance Use protective glasses for maintenance workSAFETY Use protective goggles SAFETYTowing TransportSpark Arrestor SAFETYControl Locations CONTROLSSteering Control Levers CONTROLS1. Forward 2. Neutral 3. Neutral slot, Neutral lock 4. Reverse CONTROLS Ignition SwitchParking Brake Throttle ControlRisk for burns if touched Choke ControlRefueling The engine and the exhaust system, become very hot during operationIMPORTANT INFORMATION Always use the high position F to transport Fuel Shut Off ValveMower Deck Lifting Lever Trackingthe engine stopped the ignition key removed No adjustments or maintenance to be carried out unlessBlade Control Lever Bypass LinkagesTo move forward and backward OPERATIONTraining SteeringBefore Starting Starting the EngineOPERATION 6. Move the throttle to the middle position OPERATIONTurn to START position OPERATIONIMPORTANT INFORMATION Open the fuel valve2. Remove RED cable last from both batteries Jumper cablesTo remove cables, reverse order OPERATIONEnsure that no one is near mower when engaging blade control lever RunningOPERATION Operating on Hills OPERATIONIMPORTANT INFORMATION OPERATION Mowing TipsStopping the Engine OPERATIONIMPORTANT INFORMATION OPERATION Moving Machine By HandMaintenance Schedule MAINTENANCEEngage the parking brake Before performing any service or adjustment checklistPlace the Blade-switch in the disengaged position Turn the ignition switch to OFF position and remove the keyAlways use protective glasses when handling the battery BatteryCleaning battery and terminals Always use two wrenches for the terminal screws Replacing batteryIMPORTANT INFORMATION Safety SystemTire Pressures MAINTENANCEMAINTENANCE V-beltsDeck Belt To replace deck beltCutting Blades Belt installationBlade Replacement EZT Belt1. Engage the parking brake Adjusting the Mower Deck2. Place the Blade switch in the disengaged position 3. Turn ignition switch to OFF position and remove the keyCaster Wheels CleaningRemoval and installation of caster wheel Use protective glasses when cleaning and washingGeneral LUBRICATIONSteering Control Shafts Front Wheel MountFront Wheel Bearings Engine LubricationTROUBLESHOOTING ProblemCause TROUBLESHOOTING ProblemCause Service STORAGEWinter Storage WIRING DIAGRAM Engine TECHNICAL DATAOverall dimensions 966809001TECHNICAL DATA Torque SpecificationsHEX HEAD CAP SCREWS U.S. Standard HardwareUSA requirements CONFORMITY CERTIFICATESDate, mtr reading, stamp, sign SERVICE JOURNALDelivery Service ActionAction 25-Hour ServiceAfter the First 10 Hours SERVICE JOURNALAction 50-Hour Service100-Hour Service SERVICE JOURNALAction 300-Hour ServiceAt Least Once Each Year SERVICE JOURNALSERVICE JOURNAL ActionDate, mtr reading, stamp, sign Page 2011-12-12 115 453827 Rev B