Husqvarna 968999657, 968999658, 968999692, 968999696, 968999699, 968999754, 968999766, EZ4624, EZ4824, EZ4824C, EZ5224, EZ5224 BF Weak Battery,

English-31

OPERATION

Weak Battery

If your battery is too weak to start the engine, it should

be recharged. (See “Battery” in the Maintenance

Section.)

Jumper Cables

To attach jumper cables

• Connect each end of the RED cable to the

POSITIVE (+) terminal on each battery,

taking care not to short against chassis.

• Connect one end of the BLACK cable to the

NEGATIVE (-) terminal of the fully charged

battery.

• Connect the other end of the BLACK cable

to a good CHASSIS GROUND on the mower

with the discharged battery, away from the

fuel tank and battery.

To remove cables, reverse order

• Remove BLACK cable rst from chassis and

then from the fully charged battery.

• Remove RED cable last from both batteries.

Jumper cable connection

8011-642

WARNING!

Lead-acid batteries generate

explosive gases. Keep sparks,

ame and smoking materials

away from batteries. Always

wear eye protection then around

batteries.

IMPORTANT INFORMATION

Your mower is equipped with a 12-volt

negative grounded system. The other

vehicle must also be a 12-volt negative

grounded system. Do not use your mower

to start other vehicles.

Contents

Main Page CONTENTS Page INTRODUCTION Congratulations General Driving and Transport on Public Roads Towing Page SYMBOLS AND DECALS R N P SYMBOLS AND DECALS General Operation Page Personal Safety Equipment Slope Operation Page Safe Handling of Gasoline Page Avoid electrical sparking and its consequences by the following routines: Transport Page Page Parking Brake Steering Control Levers 1 23 4 Tracking Fuel Shut Off Valve Seat Adjustment Bolts Refueling By Pass Linkage fuses Hour Meter Choke Control Ignition Switch Throttle Control Blade Switch Cutting Height Pedal Accessories Operation Training Steering Before Starting Starting the Engine 6. Page Page Weak Battery Running Ensure that no one is near mower when engaging blade switch. The mower decks anti-scalp rollers should be evenly adjusted. Operating On Hills Do not drive up or down hills with slopes greater than 10 degrees. Do not drive across slopes. Mowing Tips Clear the lawn of stones and other objects that can be thrown out by the blades. Stopping the Engine Manual Transport No adjustments or maintenance to be carried out unless: Maintenance Schedule Page Battery Ignition System Safety System Engine Cooling Air Intake Throttle Cable Choke Cable Page Air Filter Heavy Duty Air Filter fuel filter fuel Pump Air filter Tire Pressures Page IZT Belt Cutting Blades Adjusting the Mower Deck Page Cleaning Use protective glasses when cleaning and washing. Hardware Caster Wheels Parking Brake Tracking Adjustment Lubrication Schedule EZ 7 General Lubricating the Cables Lubricating in Accordance with the Lubrication Schedule Front Wheel Mount Front Wheel Bearings Deck Spindle Deck Outer Spindle Engine Oil Page Transaxle fluid Change Page Page Page TROUBLESHOOTING GUIDE STORAGE Winter Storage Service SCHEMATICS Page Page Page Page Page Page Accessories Torque Specications CONfORMITY CERTIfICATES Delivery Service Page 25-Hour Service 50-Hour Service 100-Hour Service 300-Hour Service At Least Once Each Year Page Page HUSQVARNA PRODUCT REGISTRATION INFORMATION & WARRANTY STATEMENT SECTION 2: HUSQVARNA S OBLIGATIONS UNDER THE WARRANTY SECTION 3: ITEMS NOT COVERED BY THIS WARRANTY Part Number 525 88 56-01 SECTION 4: EXCEPTIONS AND LIMITATIONS SECTION 5: CUSTOMER RESPONSIBILITIES