English-41
MAINTENANCE
Engine Cooling Air Intake
Check that the engine’s cooling air intake is free from
leaves, grass, and dirt.
If the cooling air intake is clogged, engine cooling
deteriorates, which can lead to engine damage.
The cooling air intakes rotates when the engine is
running. Mind your ngers.
Throttle Cable
Check that the engine responds to throttle increases
and that a good engine speed is attained at full
throttle.
If doubts arise, contact the service workshop.
If adjustments are necessary, they can be made as
follows for the lower cable:
1. Loosen the clamping screw for the cable’s outer
casing and move the throttle to the full throttle
position.
2. Check that the throttle cable is mounted in the
correct hole in the lower lever, see illustration.
3. Push the throttle cable’s outer casing as far to the
right as possible and tighten the clamping screw.
Choke Cable
If the engine produces black smoke or is difcult
to start, this can be because the choke cable is
incorrectly adjusted (upper cable).
If doubts arise, contact the service workshop.
If adjustments are necessary, they can be made as
follows:
1. Loosen the clamping screw for the cable’s outer
casing and push the choke control fully in.
2. Check that the choke cable is mounted in the
upper lever, see illustration. Push the choke cable’s
outer casing as far to the left as possible and
tighten the clamping screw.
8011-719
Check and clean the cooling air intake
8011-720
2. Throttle cable
Adjusting the throttle cable
8011-720
1. Choke cable
Adjusting the choke cable
1
2
1
2