Husqvarna C36C Assembly, Before You Start To Assemble The Grass Catcher, Parts Identification

ASSEMBLY

BEFORE YOU START TO ASSEMBLE THE GRASS CATCHER

Some mower models may need minor modifications before you can mount the grass catcher to the unit. Look carefully at the mower deck on your unit and compare the deck mandrel to the illustrations below. If your mower deck mandrel looks like STYLE "A", your unit is ready - proceed with the grass catcher assembly. If your mower deck mandrel looks like

STYLE "B", go to the PREPARATION section in this manual.

DECK MANDREL	DECK MANDREL
STYLE "A"
	STYLE "B"

PARTS IDENTIFICATION

				er is
				tain n
		talle	d.Con whe
	is ns	. Rep conta
	perly ently ent
	is pro frequ lacem
G	wer unriolesrsatiocaonnr.etaCcinhoemecrmk ebnadged rep
WARt oNpeINraetear manoeddd. eUtiese only
Do noct to wdamag
subjeked or
crac

COVER

UPPER CHUTE

DUMP

BAG

INDICATOR

CHUTE LATCH

			iner	is
		onta	en
	is ns	talled.laCce winher.
		. Rep conta
	perly ently ent
	is pro frequ lacem
G	wer unrleiosrastiocaonnr.etaCcinhoemecrmk ebnadged rep
WARt oNpeINraetear manoeddd. eUtiese only
Do noct to wdamag
subjeked or
crac

WHEEL

WEIGHT

U-BOLT

GRASS		LOWER CHUTE
CATCHER		ATTACHING
CONTAINERS	LOWER CHUTE	STRAPS

NOTE: When right hand (R.H.) and left hand (L.H.) are mentioned in this manual, it means when you are seated on the tractor, in the operator's position.

	(1) 3/8" Wrench	(1) Drive Ratchet
THESE ARE THE TOOLS YOU WILL NEED TO	(1) 1/2" Socket	(1) 3" or longer Extension
	(1) 9/16" Socket	(1) Short Handle
ASSEMBLE YOUR GRASS CATCHER:
		Phillips Screwdriver

CAUTION: BEFORE ASSEMBLING GRASS CATCHER TO TRACTOR:

•Depress clutch/brake pedal fully and set parking brake.

•Place gearshift/motion control lever in neutral (N) position.

• Place attachment clutch in "DISENGAGED" position.

•Turn ignition key "OFF" and remove key.

•Make sure the blade and all moving parts have completely stopped.

•Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

6