GENERAL SAFETY PRECAUTIONS
435
•Loosen the bar nut that holds the clutch cover and chain brake. Use the combination spanner. Then retighten the bar nut as tightly as you can by hand.
•Raise the tip of the bar and stretch the chain by tightening the chain tensioning screw using the combination spanner. Tighten the chain until it does not sag from the underside of the bar.
•Use the combination spanner to tighten the bar nut while holding up the tip of the bar. Check that you can pull the saw chain round freely by hand, and that there is no slack on the underside of the bar.
The position of the chain tensioning screw on our chain saws varies from model to model. See instructions under the heading What is what? to find out where it is on your model.
435e, 440e
•Release the knob by folding it out.
•Turn the knob anti clockwise to loosen the bar cover.
•Adjust the tension on the chain by turning the wheel down (+) for tighter tension and up
•Tighten the bar clutch by turning the knob clockwise.
•Fold the knob back in to lock the tensioning.
115 13 | English – 15 |
