·Prevent accidents due to unsuitable use, by an untrained person, during maintenance, repairs, overhauls, handling or transport
·Improve the reliability and durability of the machine
·Ensuring correct use, regular maintenance and rapid repair in order to reduce stoppage times and repair cost.
The manual should always be available at the place of work.
It should be read and used by any person installing or using the machine.
The obligatory technical regulations in force in the county where the machine is used must also be adhered to for maximum safety.
GENERAL SAFETY INSTRUCTIONS
The use of symbols on the drill stands and in the manual identify advice concerning your safety.
This symbol indicates that the machine is in conformance with the applicable European directive.
WARNING MANDATORY
PROHIBITED INFORMATION
These signs give advice concerning your safety.
SPECIAL INSTRUCTIONS
·The drill stand is designed to provide safe and reliable service in operating conditions corresponding with the instructions, but it can present dangers for the user and risks of damage, consequently regular on site inspection is necessary to ensure:
·Perfect technical condition (use for the purpose for which it is intended and taking into account any risks and correction of any malfunction detrimental to safety).
·Use of a diamond core bit for water lubricated cutting of concrete, asphalt, marble, stone, granite, brick and facings (porcelain, glazed tiles, ceramics, etc). The use of any other core bit is forbidden (abrasive, saw, etc).
117
