Husqvarna EZ4824EC / 965880201 manual Press in and turn the ignition key to the start position

operation

Press in and turn the ignition key to the start position.

STOP

8050-780

Turn to the start position

When the engine starts, immediately release the ignition key back to the run position.

IMPORTANT INFORMATION

Do not run the starter for more than 5 seconds each time. If the engine does not start, wait approximately 10 seconds before retrying.

Set the desired engine speed with the throttle. Allow the engine to run at a moderate speed, “half throttle” for 3-5 minutes before loading it too heavily. USE FULL THROTTLE WHEN MOWING (no choke).

WARNING!

Engine exhaust and certain vehicle components contain or emit chemicals considered to cause cancer, birth defects or other reproductive system damage. The engine exhaust contains carbon monoxide, which is a odorless, colorless, poisonous gas. Do not use the machine in enclosed spaces.

STOP

8050-781

Return to run position

		T
	S
A
F
CHOKE					UP
					BLADES ON
				W	DOWN
			O
		L			BLADES OFF
		S
					8056-001

Set the engine speed

Husqvarna-27