Husqvarna GTH2548XP TO ATTACH NOSE ROLLER See Fig, ASSEMBLE GAUGE WHEELS TO MOWER DECK See Fig

ASSEMBLY

ASSEMBLE GAUGE WHEELS TO MOWER DECK (See Fig. 4)

The gauge wheels are designed to keep the mower deck in proper position when operating mower. Be sure they are properly adjusted to ensure optimum mower perfor-

mance.

• Slide gauge wheel bar down into bracket channel, Be

sure that gauge wheel bar aligning holes are on top.

Assemble gauge wheels as shown using shoulder bolts,

3/8 washers and 3/8-16 center locknuts and tighten

securely.

TO ATTACH NOSE ROLLER (See Fig. 5)

•Assemble brackets "A" and "B" to the inside of mower mounting brackets as shown. Tighten securely.

NOTE: Be sure bracket tabs are positioned in tab holes in mower brackets.

•Position nose roller between brackets and install rod and retainer spring.

• For ease of mower to tractor assembly, raise gauge

LOCK

HEX BOLT

wheels to highest position and retain with clevis pins

and spring retainers.

• Adjust gauge wheels before operating mower. See “TO

ADJUST GAUGE WHEELS” in the Operation section

NUTROD

of this manual.

RETAINER SPRING

PIN

TAB

HOLE

"A"

BRACKET

"B"

BRACKET

NOSE

ROLLER

ADJUSTING

SHOULDER BAR

BOLT

GAUGE	3/8-16 CENTER
WHEEL
3/8 WASHER	LOCKNUT

FIG. 4

RETAINER SPRING

FIG. 5

8