Husqvarna GTH2648 owner manual Know Your Tractor

OPERATION

KNOW YOUR TRACTOR

READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR

Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference.

DH E

G

P

B NF

Q CJ

A

M

FIG. 3

Our tractors conform to the applicable safety standards of the American National Standards Institute.

(A)ATTACHMENT LIFT LEVER – Used to raise and lower the mower or other attachments mounted to your tractor.

(B)CLUTCH/BRAKE PEDAL – Used for declutching and braking the tractor and starting the engine.

(C)PARKING BRAKE – Locks clutch/brake pedal into the brake position.

(D)THROTTLE CONTROL – Used to control engine speed.

(E)ATTACHMENT CLUTCH SWITCH – Used to engage the mower blades, or other attachments mounted to your tractor.

(F)IGNITION SWITCH – Used for starting and stopping the engine.

(G)REVERSE OPERATION SYSTEM (ROS) "ON" PO- SITION – Allows operation of mower or other powered attachment while in reverse.

(H)LIGHT SWITCH – Turns the headlights on and off.

(J)MOTION CONTROL LEVER - Selects the speed and direction of the tractor.

(M)FREEWHEEL CONTROL – Disengages transmission for pushing or slowly towing the tractor with the engine off.

(N)CHOKE CONTROL – Used when starting a cold engine.

(P)SERVICEREMINDER/HOURMETER– Indicates when service is required for the engine and mower.

(Q)12-VOLT POWER PORT – Used for 12-volt acces- sories.

8