3 CONTAINER MOUNTING (See Fig. 3)
1.Install one container to left side fi rst. Install other container to right side.
NOTE: Left edge of right container should always overlap right edge of left container at center support.
2.Close cover and lock latch over center support tube. To lock and release latch, pull back on latch handle.
COVER LATCH
HANDLE
NG NI | RWA |
|
CONTAINER
HANDLE
CENTER
SUPPORT
TUBE
02082
FIG. 3
4 LOWER CHUTE (See Fig. 4)
1.Raise and hold defl ector shield in upright position.
2.Place slot in lower chute over mounting tab on mower and position lower chute over mower opening as shown.
3.Hook rear latch into fl ange hole on back of mower.
4.Hook front latch into tab hole on front of mower.
•If your tractor is equipped with gauge wheels on the mower, then it will be necessary to hook the rear latch into the hole in the R.H. gauge wheel bracket.
CAUTION: Do not remove deflector shield from mower. Raise and hold shield when attaching lower chute and allow it to rest on chute while in operation.
DEFLECTOR SHIELD
HINGE BRACKET
DEFLECTOR
SHIELD
03058
REAR GAUGE WHEEL BRACKET
MOUNTING TAB
FRONT
LATCH
WITH REAR
GAUGE WHEELS
REAR LATCH
REAR LATCH
WITHOUT GAUGE WHEELS
FIG. 4A
6
